|
|
|
|
|
|
|
Retrofit single shade auto darkening welding lenses are perfect for general-purpose stick and MIG welding applications. A dark state 10 with an incredibly clear light state of 3. Not recommended for TIG welding less than 40 amps.
|
Not intended for impact protection. Apply over a faceshield to dissipate heating, preventing visor from warping in high heat applications. Ideal for 170SB headgear. Size: 15 1/2'' x 9''
|
|
|
|
|
|
|
|
|
Polycarbonate cover plate protect your welding lens against spatter, sparks and small particles. Thinner than standard cover plates, this 0.040 lens is designed to fit the contour of Radnor® Cobra™ 40Vi helmets for an optimal fit.
|
Retrofit single shade auto darkening welding lenses are perfect for general-purpose stick and MIG welding applications. A dark state 10 with an incredibly clear light state of 3. Not recommended for TIG welding less than 40 amps.
|
|
|
|
|
|
|
|
|
Replacement Shade 4 hardened glass lenses for 50mm Welding Goggles.
|
Clear polycarbonate cover lenses for 50mm Welding Goggles, offering scratch and spatter resistance when used as an outer cover lens. Meets or exceeds ANSI Z87.1-2003 Standard for impact protection.
|
|
|
|
|
|
|
|
|
Replacement Shade 5 polycarbonate lenses for 50mm Welding Goggles. Meets or exceeds ANSI Z87.1-2003 Standard for impact protection.
|
ArcOne® Hawk® is an excellent entry level helmet for the occasional welder. Lightweight, easy nod-down, and excellent head, neck and ear coverage. Comes equipped with Tradesman® T240 Horizontal Single Filter. This 2'' X 4.25'' X 0.2'' filter has 5.25'' active viewing area. Starting with a light state of 3 and immediately switching to fixed shade 10.5.
|
|
|
|
|
|
|
|
|
So soft and airy, you'll forget you are wearing a helmet. Sweatband features layers of thick cushions designed to absorb sweat. Velcro fastener help stop helmet slippage.
|
2'' x 4 1/2'' These glass lenses are available in different levels of magnification to increase the welder's attention to smaller details.
Available in nine magnification levels.
|
|
|
|
|
|
|
|
|
Metal device for non-slotted caps features curved aluminum channel that fits over bill of cap for bill forward wear and secures with coiled spring that stretches around the exterior cap crown. Visors secured with integral plastic lugs.
|
Mounts visor instantly on a wide variety of non-slotted caps with integral plastic lugs. Uses clips pressed over the cap rim for firm fit; removes with thumb pressure. Not to be used with caps that have slots with rain troughs.
|
|
|
|
|
|
|
|
|
The easiest, least costly adapter to mount visors to slotted caps, with integral plastic lugs. Includes spark deflector and pivoting blades.
|
All plastic, totally dielectric device for slotted caps. Curved plastic channel fits over the bill of the cap and easily into cap slots, with internal plastic lugs to secure visors (sold separately).
|
|
|
|
|
|
|
|
|
Quick detach brackets that join any visor and spark deflector with plastic pins to any cap equipped with #87 mounting blades.
|
4 1/2'' x 5 1/4'' cover plate made with high performance CR-39® for maximum scratch and spatter resistance when used as an outer cover lens to protect the filter lense.
|
|
|
|
|
|
|
|
|
4 1/2'' x 5 1/4'' specialty light filtration lens for all your welding and cutting needs. Special gold filters allow the welder to see his work in true, more natural colors, staying cooler than traditional glass lenses at approximately a third of the weight.
Available in five Shading values.
|
4 1/2'' x 5 1/4'' specialty light filtration lens for purposes such as welding, to be used in conjunction with compatible goggles.
Available in 10 Shading values.
|
|
|
|
|
|
|
|
|
Polycarbonate cover plate protect your welding lens against spatter, sparks and small particles. Thinner than standard cover plates, this 0.040 lens is designed to fit the contour of Radnor® 4'' x 5'' Cobra™ helmets for an optimal fit.
|
4 1/2'' x 5 1/4'' polycarbonate lens offers maximum impact strength, used as an inner lens nearest to the eyes to protect against severe impacts that could shatter or penetrate the filter lens.
|
|
|
|
|
|
|
|
|
2'' x 4 1/2'' These polycarbonate lenses not only offer eye protection as a sturdy inner lens for welding goggle systems, but are also available in different levels of magnification to increase the welder's attention to smaller details. Available in eight magnification levels
|
2'' x 4 1/2'' cover plate made with high performance CR-39® for maximum scratch and spatter resistance when used as an outer cover lens to protect the filter lense.
|
|
|
|
|
|
|
|
|
2'' x 4 1/4'' specialty light filtration lens for all your welding and cutting needs. Special gold filters allow the welder to see his work in true, more natural colors, staying cooler than traditional glass lenses at approximately a third of the weight. Available in five Shading values.
|
2'' x 4 1/4'' specialty light filtration lens for purposes such as welding, to be used in conjunction with compatible goggles.
Available in 11 Shading values.
|
|
|
|
|
|
|
|
|
Polycarbonate cover plate protect your welding lens against spatter, sparks and small particles. Thinner than standard cover plates, this 0.040 lens is designed to fit the contour of Radnor® 2'' x 4'' Cobra™ helmets for an optimal fit.
|
2'' x 4 1/2'' polycarbonate lens offers maximum impact strength, used as an inner lens nearest to the eyes to protect against severe impacts that could shatter or penetrate the filter lens.
|
|
|
|
|
|
|
|
|
Universal Magnifier Lenses are designed to fit Radnor® Cobra™ and most other manufacturer's welding helmets. Get to those hard to see areas or sue for jobs requiring detailed work.
Available in five magnification levels.
|
Classic flip-up style offers versatility for workers in unique environments. Black frame with flip-down green Infra-Dura® Welding Shade 3.0 filtration.
|
|
|
|
|
|
|
Sturdy frame holds heavy grommets placed 12" on center. The frame is made of strong 1" 18-gauge tubular steel and finished with black enamel to prevent rusting. No tools needed for assembly. Features 24" platform legs for stability, with 4" of clearance at the bottom. Includes both screen and frame!
Available in four materials and two sizes.
|
|