|
|
|
|
|
|
|
|
|
|
High-visibility Safety Fencing is tough, durable, and long lasting. Can be re-used when your first project is completed. Light weight rolls are easy to transport and store. Can offer you peace of mind where visible barriers are important for safety.
|
High-visibility Safety Fencing is tough, durable, and long lasting. Can be re-used when your first project is completed. Light weight rolls are easy to transport and store. Can offer you peace of mind where visible barriers are important for safety.
|
|
|
|
|
|
|
|
|
|
|
|
|
High-visibility Safety Fencing is tough, durable, and long lasting. Can be re-used when your first project is completed. Light weight rolls are easy to transport and store. Can offer you peace of mind where visible barriers are important for safety.
|
Get double duty out of your traffic cones with this adapter! Simply insert on top of traffic cone to load warning sings, lights, flags and barricade tapes.
Available in two colors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Organize and dispense your labels with ease! Ideal for labels on a roll with a diameter size up to 4'' in width and 3'' core.
|
Change signs fast and easy with this 10'' x 14'' clear acrylic holder. Holds up to three signs (sold separately).
|
|
|
|
|
|
|
|
|
|
|
|
|
Compact clear holder equipped with multiple mounting options. Holds up to 50 tags (sold separately).
|
Designed to accommodate a U-channel Post or tubular pipe post. This 15'' diameter base is designed for permanent mounting: simply drive stakes through three mounting holes located in the base.
|
|
|
|
|
|
|
|
|
|
|
|
|
Blank 7'' x 10'' 0.050 Rigid Plastic signage signage for use with the CPM-100 Sign and Label Printer.
|
Blank 14'' x 20'' 0.050 Rigid Plastic signage signage for use with the CPM-100 Sign and Label Printer.
|
|
|
|
|
|
|
|
|
|
|
|
|
Blank 10'' x 14'' signage for use with the CPM-100 Sign and Label Printer.
Available in 0.050 Rigid Plastic, 0.040 Aluminum or 0.095 Fiberglass.
|
Blank 4'' x 12'' 0.050 Rigid Plastic signage for use with the CPM-100 Sign and Label Printer.
|
|
|
|
|
|
|
|
|
|
|
|
|
Secure traffic signs to any U-channel post or mounting bracket with this standard Bolt & Nut hardware pack. Contains two nuts and two bolts.
|
These bright red 5 1/2'' break-away plastic ties can be tied onto first aid cabinets, eye wash stations and survival kits to show whether or not it has been opened recently. Simply pull on the specially designed break-away tab and the tie easily breaks, allowing access to anything it was holding in place; no scissors necessary.
|
|
|
|
|
|
|
|
|
|
|
|
|
This brushed metallic 4 1/3'' x 33' roll is designed for use with the CPM-100 Sign and Label Printer.
Available in two colors.
|
Customize signs and labels with ease!
- Multi-user software
- USB or parallel connection
- AC power supply
- One-year warranty
- Free tech support
- Free software upgrades
|
|
|
|
|
|
|
|
|
|
|
|
Customize signs and labels with ease!
- The latest print & cut technology
- Multi-color & process color (CMYK) Thermal Transfer Printer
- Plot & die-cut letters, numbers, symbols
- 8" wide printing capabilities
- Eliminate pre-cut sized label rolls
- Eliminate pre-printed labels
- No wasted stock or dead inventory
|
This 4 1/3'' x 33' roll is designed for use with the CPM-100 Sign and Label Printer.
Available in two styles.
|
|
|
|
|
|
|
|
|
|
|
|
|
This durable resin 4 2/3'' x 164' roll is designed for use with Gloss Polyester, Reflective, Tamper-Evident, Brushed Metallic, and Cutting Only Rolls for the CPM-100 Sign and Label Printer.
Available in six colors. Available as a full cartridge or just the refill ribbon.
|
This 18'' diameter portable sign base comes with sign post, adapter and attachments. Engineered from high density polyethylene, this economical sign base is designed to be filled with sand or aggregate concrete to weigh up to 62 pounds.
|
|
|
|
|
|
|
|
|
|
|
|
|
15 3/4'' x 23 1/3'' 0.085 Rigid Plastic with eight clear pockets for viewing tags (sold separately).
|
Durable endcaps for Egress Strip Extrusion holding devices.
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed for use with 2'' Glow Tape, and can also accept 1'' Glow tape. Strips feature extruded aluminum track for secure mounting. Best suited for low-level markings on walls.
|
Two adjustable glare-free light heads with universal 120/277 VAC input to mount on top of lighted signs (sold separately). Uses halogen MR16 lamps with front glass cover. Replacement lead-calcium (6 volt 4.5ahr) battery.
|
|
|
|
|
|
|
|
|
|
|
|
|
For use when information needs to be changed frequently. Simply wipe off what you no longer need and write in new data.
|
Protect your own 8 1/2'' x 11'' excavation map in this attractive 11'' x 11 1/2'' holder. Simply print off and insert your own custom map. Subsurface printed with non-glare finish.Install with three supplied mounting strips for easy installation.
Headars available in standard or GLOW-IN-THE-DARK lettering.
|
|
|
|
|
|
|
|
|
|
|
|
|
Perfect for increasing visibility in potentially hazardous areas with this 2'' x 3'' flashing light. Features seven different light patterns. Clips easily to signs, paddles and floor signs. Runs on two AA batteries (not included).
|
This gloss polyester 4 1/3'' x 49' roll is designed for use with the CPM-100 Sign and Label Printer.
Available in seven colors.
|
|
|
|
|
|
|
|
|
|
|
|
|
This 7'' x 10'' sign holder fits wall partitions 2 5/8'' thick.
|
These magnetic numbers are black on white 2 1/2'' x 1 1/2'' backgrounds. Each set includes one each of digits one through nine.
|
|
|
|
|
|
|
|
|
|
|
|
|
Mark specific area and promote safety fast and easy! Stable, stand along design featuring a large wheel base ensuring smooth placement of tape, heavy duty construction that stands up to years of constant use, with minimum assembly required. Holds up to a 4'' x 60 yard roll floor marking or a 4'' x 50 yards roll pavement marking tape. Tape is applied quickly and easily with no awkward bending or stooping.
|
These stylish posts are ideal for the office, conventions, lobbies, restaurants and trade shows. Posts are 2 1/2'' with 2 1/2'' ball tops, 40'' overall high with a 14'' base, and feature four ''C'' hooks. Includes three 10-foot sections of 2 1/2'' heavy duty chain. Available in chrome or black chrome.
|
|
|
|
|
|
|
|
|
|
|
|
|
Set label dispenser on table or mount on wall. Made of heavy-duty durable plastic. Standard roll capacity 6 1/2'' OD (up to 11'' OD with roll lifts). Easy to load and thread with both 1'' and 3'' core adapters.
|
14'' x 10'' 0.050 Rigid Plastic multi-lock tag accommodates up to 10 padlocks (sold separately). Features 5/8'' grommet.
|
|
|
|
|
|
|
|
|
|
|
|
|
This outdoor durable resin 4 2/3'' x 164' roll is designed for use with Premium Grade Vinyl Supplies and the CPM-100 Sign and Label Printer.
Available in eight colors. Available as a full cartridge or just the refill ribbon.
|
Constructed from rust-resistant 0.032 anodized aluminum and coupled with reinforced stainless steel clips, this 13 7/8'' x 12'' placard holder keeps placards securely in place.
|
|
|
|
|
|
|
|
|
|
|
|
|
Add to the top of the U-Channel Sign Post to drive post into ground without damaging the U-Channel.
|
This wall mountable sign can hold one Header and multiple Inserts of your choice (sold separately). Features brass grommets for easy mounting and thumb notch on pocket allowing for easy removal of inserts.
Available in two sizes.
|
|
|
|
|
|
|
|
|
|
|
|
|
This reflective 4 1/3'' x 33' roll is designed for use with the CPM-100 Sign and Label Printer.
Available in two colors.
|
Replacement cutter blade for the CPM-100 Sign and Label Printer.
|
|
|
|
|
|
|
|
|
|
|
|
|
Fiberglass ribs designed for 48'' x 48'' Reflective Roll Up Signs.
|
Designed to hold 48'' x 48'' Reflective Roll Up Signs. Features non tip springs and adjustable legs. Signs adjust 12'' - 18'' above grade.
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed to hold 48'' x 48'' Roll Up, rigid, or aluminum signs. Meets ANSI NCHRP-350 low speed test (40 mph or under level 2).
|
24'' x 20'' 0.085 Rigid Plastic with eight 4 3/4'' deep tag pockets to provide a convenient location to store up to 800 of your safety and lockout tags (sold separately).
|
|
|
|
|
|
|
|
|
|
|
|
|
Estimate the height of people as they walk through the doorway with this laminated 2'' x 40'' 4 mil Pressure-Sensitive Vinyl tape. Includes measurements from 44'' x 80'' with inch and foot marks.
|
Molded plastic frame for use with surface and subsurface style signs (sold separately). Signs fit securely into frames with a snap lock mechanism. Frames are wall-mountable (screws not included).
Available in three colors, four sizes and two styles of corner shapes.
|
|
|
|
|
|
|
|
|
|
|
|
|
This 2 1/2'' x 8 1/2'' sign holder fits wall partitions 2 5/8'' thick.
|
Displays 2'' wide plates in a 1/16'' slot on desks, counter tops or any flat surface.
Available in two color finishes and two lengths.
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed to be inserted into corrugated plastic signs and inserted into loose earth or snow to keep sign erect and visible.
|
Secure traffic signs to any U-channel post or mounting bracket with this standard Bolt & Nut hardware pack. Contains two breakaway nuts and two tamper resistant one-way bolts.
|
|
|
|
|
|
|
|
|
|
|
|
|
This tamper-evident 4 1/3'' x 33' roll is designed for use with the CPM-100 Sign and Label Printer.
Available in three styles.
|
Dispense 1000 ft. rolls of plastic barricade and identification tape quickly and easily. Sturdy, lightweight polypropylene storage reel equipped with a hardened steel safety cutting blade and carrying handle. Easy-fill, self-storing reel advances tape as needed using thumb. Can be used with any 2'' or 3'' tape on 3'' cores (sold separately).
|
|
|
|
|
|
|
|
|
|
|
|
|
Best suited for mounting any 18'' x 12'' traffic sign, this rust-proof, paint-chip resistant post is 75% lighter than steel! 3/8'' holes, 1'' on center. Mounting hardware sold separately.
Available in two lengths.
|
7'' x 7'' rugged tag withstands moisture, chemicals and frequent handling. Made from lightweight pressure-bonded fibers that are abrasion- and tear-resistant with a 5/8'' grommet.
|
|
|
|
|
|
|
|
|
|
|
|
|
Great for mounting traffic signs in the ground, concrete or portable base settings. Engineered from high-carbon grade SP-80 billet steel for years of maintenance-free performance, featuring ribbed back and flange for easy installation.
Available in two lengths.
|
Create your own custom signs, tags and labels quickly and easily with our UDO Label Professional, the professional desktop printer that lets you produce your own signs, tags and labels with a simple push of a button.
|
|
|
|
|
|
|
|
|
|
|
|
|
These 4'' x 82' UDO LP industrial strength, high gloss vinyl labels are UV stable, waterproof, oil and grease resistant, scratch and rub resistant and are so durable that you can jet-wash them! Ultra-smooth finish ideal for adhering to pipes, walls, equipment, windows and most clean, dry surface. Offers over five years of outdoor durability. Designed for use with the UDO LP 400 Series custom label printer.
Available in 15 vibrant colors.
|
These 2'' x 82' UDO LP industrial strength, high gloss vinyl labels are UV stable, waterproof, oil and grease resistant, scratch and rub resistant and are so durable that you can jet-wash them! Ultra-smooth finish ideal for adhering to pipes, walls, equipment, windows and most clean, dry surface. Offers over five years of outdoor durability. Designed for use with the UDO LP 400 Series custom label printer.
Available in 15 vibrant colors.
|
|
|
|
|
|
|
|
|
|
|
|
|
These 4 1/3'' x 298' UDO LP Premium Resin Ribbon are designed for use with the UDO LP 400 Series custom label printer.
Available in six vibrant colors.
|
These 4'' x 33' UDO LP continuous reflective vinyl rolls are designed for use with the UDO LP 400 Series custom label printer.
Available in 2 reflective colors.
|
|
|
|
|
|
|
|
|
|
|
|
|
These 1 1/8'' x 82' UDO LP industrial strength, high gloss vinyl labels are UV stable, waterproof, oil and grease resistant, scratch and rub resistant and are so durable that you can jet-wash them! Ultra-smooth finish ideal for adhering to pipes, walls, equipment, windows and most clean, dry surface. Offers over five years of outdoor durability. Designed for use with the UDO LP 400 Series custom label printer.
Available in 15 vibrant colors.
|
This tamper destructible asset marking vinyl roll is currently only available in silver/gray in 2'' x 82' rolls. Designed for use with the UDO LP 400 Series custom label printer.
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed to clean thermal printer heads found in thermal printers / bar code printers and fax machines. Designed for use with the UDO LP 400 Series custom label printer.
|
Protect your valuable underground investment with this 4'' (above ground) x 3.25'' post. Well suited for marking pipelines, conduits and cables. The only post that can be tied into a knot, yet is so stiff that it can withstand high wind loading.
Available in six different colors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Water resistant, permanent ink to fill in the blanks on signs and tags.
|
Holds signs in a 1/8'' slot to project at a 90° angle (perpendicular) from wall. Cap nut and screws not included.
Available in two color finishes and two lengths.
|
|
|
|
|
|
|
|
|
|
|
|
|
Displays 2'' wide plates in a 1/16'' slot on walls. Screws not included.
Available in two color finishes and two lengths.
|
Hang these 110-foot chains between a series of warning posts/barrels for crowd control or guiding traffic. Made from lightweight yet remarkably strong rust-resistant polyethylene. Designed to prevent kinking.
Available in two colors and two sizes.
|
|
|
|
|
|
|
|
|
|
|
|
|
Made from lightweight yet remarkably strong rust-resistant polyethylene. Designed to prevent kinking.
Available in two colors.
|
For a more permanent connection in plastic warning chains. Made from lightweight yet remarkably strong rust-resistant polyethylene. Designed to prevent kinking.
Available in two colors and two sizes.
|
|
|
|
|
|
|
|
|
|
|
|
|
Used to attach separate lengths of chain. Made from lightweight yet remarkably strong rust-resistant polyethylene. Designed to prevent kinking.
Available in two colors and two sizes.
|
Adapter fits on top of warning posts (sold separately). Accommodates signs up to 3/16'' thick.
Available in four colors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Manage crowd control efficiently and economically with these 41'' tall, 3'' diameter warning posts. The base is hollow to be filled with gravel, sand or water for added stability. Each unit includes base, ball top and c-hooks for chain placement (chains sold separately). Available in yellow, white or yellow/black stripes.
|
Features excellent peel strength, good initial lack and high adhesion. These rolls of 216 feet of 1/32'' thick double-sided tape are excellent for mounting Glo Brite® rigid plastic signs.
|
|
|
|
|
|
|
|
|
|
|
|
|
Features excellent peel strength, good initial lack and high adhesion. These rolls of 216 feet of 1/32'' thick double-sided tape are excellent for mounting Glo Brite® rigid plastic signs.
|
Features excellent peel strength, good initial lack and high adhesion. These rolls of 216 feet of 1/32'' thick double-sided tape are excellent for mounting Glo Brite® rigid plastic signs.
|
|
|
|
|
|
|
|
|
|
|
|
|
Features excellent peel strength, good initial lack and high adhesion. This 1/32'' double-sided tape is excellent for mounting Glo Brite® rigid plastic signs.
Quantity: 100 sets (each set has two markers- one normal ''L'' shape and one backward ''L'', which means 200 markers) per case.
Available in two sizes.
|
Features excellent peel strength, good initial lack and high adhesion. These 1/32'' thick, double-sided 3/4'' x 2'' tape pads are excellent for mounting Glo Brite® rigid plastic signs.
|
|
|
|
|
|
|
|
|
|
|
Flourescent orange vinyl fabric windsock available in a 10'' or an 18'' throat. Includes necessary frame, nylon ties and fasteners for installation.
Available in two sizes.
|
|
|
