Materials

ACRYLIC (0.125)

Durable polished finish
Perfect for all indoor architectural applications

ALUMINUM (0.040)

Reinforced baked enamel on both sides
Corrosion-free, UV-resistant material built to permanently withstand harsh elements both indoor and outdoor
Supplied with radius corners and pre-drilled corner mounting holes for fast and easy installation

ALUMINUM (0.063)

Corrosion-free, reinforced baked enamel on both sides
UV-resistant material built to permanently withstand harsh elements both indoor and outdoor
Supplied with radius corners and pre-drilled corner mounting holes for fast and easy installation

Corrugated Rigid Plastic (4 mm)

Highly durable plastic material engineered for long-lasting indoor and outdoor use
Double-walled plastic separated by corrugation for added durability and stability

DIAMOND GRADE REFLECTIVE ALUMINUM

Yellow-green flourescence provides superior visibility
Surface combines the fluorescent color and micro-prismatic reflection with distinguishable diamond lattice pattern in the sheeting
Complies with FHWZ DOT 23 CFR Part 655 National Standards for Traffic Control Devices

FIBERGLASS (0.095)

Fiber Brite™ fiber glass is rigid, shatter-proof and dent-resistant
Designed to stand up to the most severe outdoor weather as well as weak alkalis and acids
Supplied with radius corners and pre-drilled corner mounting holes for fast and easy installation

GRAVOGLAS 2-PLEX

0.010'' cap thickness and UV stability
Perfect for all indoor and outdoor applications
Low-glare matte finish for sub-surface engraving

GRAVOPLY 2

Ideal for name plates and interior signage applications
Micro-thin surface layer perfect for very fine detailed engraving
Low-glare matte surface finish

GRAVO-TEC

Designed for indoor tactile/ADA signage applications
Flexible modified acrylic creates raised letter signage
Compliant with all ADA raised letter regulations
Low-glare matte surface finish

GLO BRITE® # 7520 (0.010 POLYESTER)

Safety grade photo luminescent flexible polyester
Designed to glow for over six hours in total darkness
Four minute recharge time
UV-light resistant
Non-toxic, non-radioactive
Coated with an acrylic adhesive
Best suited for everyday indoor applications
Film meets or exceeds the following Standards: ASTM, IMO, ISO/CD, NFPA and OSHA

GLO BRITE® # 7520 (RIGID PLASTIC 0.060)

Combination of polyester film applied to a rigid polystyrene
Safety grade photo luminescent rigid plastic material
Designed to glow over six hours in total darkness
Four minute recharge time
UV-light resistant
Non-toxic, non-radioactive
Best suited for everyday indoor applications
Exceeds the following Standards: ASTM, IMO, ISO/CD, NFPA and OSHA
Standard with radius corners and pre-drilled corner mounting holes for easy installation

GLO BRITE® # 7550 (0.010 POLYESTER)

High safety grade photo luminescent flexible polyester
Designed to glow for over 24 hours in total darkness
Non-toxic, non-radioactive
Coated with an acrylic adhesive
Five minute recharge time
Glows 2 1/2 times brighter than 7520 Glow Polyester
Film meets or exceeds the following Standards: ASTM, IMO, ISO/CD, NFPA and OSHA

GLO BRITE® # 7550 (RIGID PLASTIC 0.060)

Combination of polyester film applied to a rigid polystyrene
High safety grade photo luminescent rigid plastic laminated material
Designed to glow for over 24 hours in total darkness
High-grade flexible glow polyester
Five minute recharge time
Meets or exceeds the following Standards: ASTM, IMO, ISO/CD, NFPA and OSHA

HIGH INTENSITY REFLECTIVE ALUMINUM (0.080)

High intensity reflective sheeting applied to 0.080 Aluminum
Designed to meet MUTCD Requirements
Designed for traffic control and work zone areas

MAGNETIC (0.030)

Heavy gauge, flexible material
Adheres strongly to most metal surfaces
Suitable for both stationary indoor and outdoor use
Easily removable as needed

MYLAR® (0.015)

Made from a thin film clear material
Designed to allow great flexibility
Great for long term use
Suitable for both indoor and outdoor use
Perfect for plant markings

NMF Tuff Guard

0.063 Acrylic material with subsurface printing
Protected with vinyl backing
Easy to install with optional adhesive backing or mounting holes
Designed to withstand harsh environments

OILBOARD (0.015)

Made from a thick oil-treated tagboard paper material
Created with special oils to prevent ink bleed-through
Durable composition perfect for plant markings

PAPER (60 lbs.)

Great for everyday permanent label applications
Pressure-sensitive paper labels on a roll
Easy peel and stick backing for fast and easy application

PERMA-SHIELD I (0.125 Composite)

Sub-surface printing resistant to tears, cracks and water
Permanently bonded fiberglass backing
Non-glare, UV resistant material permanently protects message for long-term use
Exceptionally durable for both indoor and outdoor applications

PERMA-SHIELD II (0.080 Composite)

Sub-surface printing resistant to tears, cracks and water
Permanently bonded styrene backing
Non-glare, UV resistant material permanently protects message for long-term use
Exceptionally durable for both indoor and outdoor applications

POLYESTER (0.070)

Top-coated polyester film is crystal clear
Designed to allow great flexibility
Great for long-term use
Suitable for both indoor and outdoor use
Perfect for plant markings

POLYETHYLENE (4 mm Corrugated)

Constructed from a water-resistant, lightweight corrugated material best suited for temporary indoor and outdoor applications

POLYETHYLENE (0.060)

Made from a sturdy flexible plastic
Water-resistant, lightweight and durable
Long lasting material able to conform to various surfaces
Suitable for both indoor and outdoor use
Perfect for parking lot and plant marking applications

POLYETHYLENE (High Density)

Constructed from a durable molded plastic
Water and dent resistant
Suitable for both indoor and outdoor applications

POLYPROPYLENE (0.10 Modified)

Lightweight, tear-resistant material
Flexible, modified material
Suitable for both indoor and outdoor applications

POLYSTYRENE RIGID PLASTIC (0.050)

Highly durable plastic material engineered for long-lasting indoor and outdoor use
Supplied with radius corners and pre-drilled corner mounting holes for fast and easy installation

POLYSTYRENE RIGID PLASTIC (0.085)

High-impact, shatter resistant material
Used for many information centers
Suitable for both indoor and outdoor applications

POLYTAG (0.010'')

Resists tearing and withstands temperatures of up to 350º F (176º C)
Ideal for shorter term applications in normal environments
Can be easily written on

PRESSURE-SENSITIVE VINYL (2 mil)

Great for everyday permanent label applications
Pressure-sensitive vinyl label on a roll
Water and humidity resistance
Easy peel and stick backing for fast and easy application
Suitable for both indoor and outdoor applications

PRESSURE-SENSITIVE VINYL (3.6 mil)

3.6 mil calendared vinyl
Polymetric
Pressure-sensitive permanent adhesive backing scored for fast peel off and application
Semi-gloss finish
Strongly adheres to both flat and curved surfaces
Suitable for both indoor and outdoor applications

PRESSURE-SENSITIVE VINYL (4 mil)

Flexible 4 mil thick surface
Pressure-sensitive permanent adhesive backing scored for fast peel off and application
Moisture-resistant, long-lasting material
Strongly adheres to both flat and curved surfaces
Suitable for both indoor and outdoor applications

REFLECTIVE ALUMINUM (0.080)

Engineering grade, reflective material
Reflective Vinyl sheeting applied to 0.080 Aluminum
Primarily used for parking lots
Weather-proof, corrosion-free, reinforced baked enamel
UV-resistant material built to permanently withstand harsh elements both indoor and outdoor
Supplied with radius corners and pre-drilled corner mounting holes for fast and easy installation

REFLECTIVE PRESSURE-SENSITIVE VINYL

Flexible, glass-beaded lens, retro-reflective vinyl
Highly resistant against extreme weather conditions, including intense heat and cold

Sign Muscle™

A proprietary coating added to the face of signs to extend the life of the product
Protects signs from:
- Harsh Environments
  - Stops fading from UV rays
  - Prevents cracking from temperature changes
- Graffiti
  - Comes clean after vandalism
  - Brings your sign back to life
- Chemicals
  - Protects from damaging fumes and liquids
- Scratches
  - Resists damage from scratches and abrasions

TYVEK (68 lb.)

Tyvek® is a registered trademark of DuPont
This tear-proof, lightweight material is perfect for industrial tag applications

UNRIPPABLE VINYL (0.015'')

Made from a chemical-resistant, unrippable vinyl with guaranteed longevity
Ideal for any industrial tag application and tough, greasy environments

VINYL & FLEX TREAD (0.021)

0.021 Pressure-sensitive vinyl laminated with anti-skid tread
Aggressive adhesion
Durable material ideal for long-term floor marking use
Best use on smooth surfaces (not suitable for rough surfaces)
Anti-skid tead exceeds industry standards for non-slip surfaces

What's a "mil"? Some of the above materials are measured in thickness using a unit called "mils." One mil is equal to approximately 0.001 inches (0.0254 mm), meaning that a 4 mil material would be about 0.004 inches (0.1016 mm) thick.

Guide to Sign Legibility Determine the viewing distance for your sign

Viewing Distance	Letter Height
30'	3/4''
40'	1''
55'	1 1/4''
65'	1 1/2''
75'	1 3/4''
85'	2''
115'	2 1/2''
135'	3''
150'	4''
200'	6''
350'	8''