|
|
|
|
|
|
|
|
|
|
Workers can express patriotism with this bright, attractive designs and protect themselves at the same time. This lightweight, durable and comfortable hard hat features Fas-Trac® suspension, accessory slots and a superior finish. Meets all applicable requirements for a Type I (top impact helmet as outlined in ANSI/ISEA Z89.1-2009, Class E). Also meets ANSI/ISEA Z-89.1-2009 voluntary standard for reverse donning.
|
Includes green-tinted face shield, attachable chin cup, hard hat bracket, and hard hat. 10 Cal/cm2.
Available in five hard hat colors.
|
|
|
|
|
|
|
|
|
|
|
|
|
This suspension snaps to the faceshield allowing the hood to move as the wearer turns. Size can be adjusted to fit individual workers. This suspension is a replacement for the 3M™ GVP Inner Shroud And Cap Suspension Hood Assembly.
|
This assembly can be used on 3M™ Belt-Mounted Powered Air Purifying Respirator (PAPR)s and Supplied Air Respirator Systems. This hood offers exceptional comfort and can be worn with facial hair and glasses. Includes 3M™ Hood, Faceshield Cover, 3M™ Hatshell, Head Suspension, Chin Strap, and Squeeze Clamp.
|
|
|
|
|
|
|
|
|
|
|
|
|
This assembly can be used on 3M™ Belt-Mounted Powered Air Purifying Respirator (PAPR)s and Supplied Air Respirator Systems. This hood offers exceptional comfort and can be worn with facial hair and glasses. Includes 3M™ Hood, Faceshield Cover, 3M™ Cap Suspension, Chinstrap, and Squeeze Clamp.
|
This economical Bump Cap model offers lightweight protection where meeting ANSI hard hat standards are not necessary. Comes with replaceable 4-point suspension, Microporite® browpad and side vents for a cool, comfortable fit. Can be used with a faceshield bracket and visor. Available in six colors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Protect your workers with a sturdy, lightweight aluminum faceshield bracket to be outfitted with a PETG faceshield (sold separately). Easily and securely attaches to a variety of hard hats.
|
Workers can express patriotism with this bright, attractive designs and protect themselves at the same time. This lightweight, durable and comfortable hard hat features Fas-Trac® suspension, accessory slots and a superior finish. Meets all applicable requirements for a Type I (top impact helmet as outlined in ANSI/ISEA Z89.1-2009, Class E). Also meets ANSI/ISEA Z-89.1-2009 voluntary standard for reverse donning.
|
|
|
|
|
|
|
|
|
|
|
|
|
Workers can express patriotism with this bright, attractive designs and protect themselves at the same time. This lightweight, durable and comfortable hard hat features Fas-Trac® suspension, accessory slots and a superior finish. Meets all applicable requirements for a Type I (top impact helmet as outlined in ANSI/ISEA Z89.1-2009, Class E). Also meets ANSI/ISEA Z-89.1-2009 voluntary standard for reverse donning.
|
Workers can express patriotism with this bright, attractive designs and protect themselves at the same time. This lightweight, durable and comfortable hard hat features Fas-Trac® suspension, accessory slots and a superior finish. Meets all applicable requirements for a Type I (top impact helmet as outlined in ANSI/ISEA Z89.1-2009, Class E). Also meets ANSI/ISEA Z-89.1-2009 voluntary standard for reverse donning.
|
|
|
|
|
|
|
|
|
|
|
|
|
Workers can express patriotism with this bright, attractive designs and protect themselves at the same time. This lightweight, durable and comfortable hard hat features Fas-Trac® suspension, accessory slots and a superior finish. Meets all applicable requirements for a Type I (top impact helmet as outlined in ANSI/ISEA Z89.1-2009, Class E). Also meets ANSI/ISEA Z-89.1-2009 voluntary standard for reverse donning.
|
This economical Bump Cap model offers lightweight protection where meeting ANSI hard hat standards are not necessary.
|
|
|
|
|
|
|
|
|
|
|
|
|
Constructed of a lightweight, one-piece injection molded high-density polyethylene, these helmets are available for your logo, slogan or striping. You can select the colors and the areas to be imprinted. We use both single and multi-color imprinting techniques to provide a choice of up to four colors. The rigid, dielectric shell works together with suspension sytems for complete head protection. Made in The U.S.A. Meets all applicable requirements for Type I (top impact) helmet as outlined in ANSI/ISEA Z89.1-2009, Class E. Also meets the ANSI/ISEA Z89.1-2009 voluntary standard for reverse donning.
Minimum Quantity: 20 Hard Hats
Available in two suspension types and in six colors.
|
Constructed of a lightweight, one-piece injection molded high-density polyethylene, these helmets are available for your logo, slogan or striping. You can select the colors and the areas to be imprinted. We use both single and multi-color imprinting techniques to provide a choice of up to four colors. The rigid, dielectric shell works together with suspension sytems for complete head protection. Made in The U.S.A. Meets all applicable requirements for Type I (top impact) helmet as outlined in ANSI/ISEA Z89.1-2009, Class E. Also meets the ANSI/ISEA Z89.1-2009 voluntary standard for reverse donning.
Minimum Quantity: 20 Hard Hats
Available in four suspension types and in eight colors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Protect your workers with this dielectric nylon rim to be outfitted with a PETG faceshield (sold separately). Easily and securely attaches to a variety of hard hats.
|
Workers can express patriotism with this Freedom Series™ bright, attractive design and protect themselves at the same time. This lightweight, durable and comfortable hard hat features Fas-Trac® suspension, accessory slots and a superior finish. Meets all applicable requirements for a Type I (top impact) helmet as outlined in ANSI/ISEA Z89.1-2009, (Class E). Also meets ANSI/ISEA Z-89.1-2009 voluntary standard for reverse donning and low temperatures.
|
|
|
|
|
|
|
|
|
|
|
|
|
So soft and airy, you'll forget you are wearing a helmet. Sweatband features layers of thick cushions designed to absorb sweat. Velcro fastener help stop helmet slippage.
|
The Hard Hat Terry Topper® comes with multiple snaps along the edges that allows it to wrap around hart hat sweat bands for a secure fit.
|
|
|
|
|
|
|
|
|
|
|
|
|
Help your workers stay more comfortable and more productive in hot, humid weather! Economical, soft and absorbent band comes with a securely attached elastic band.
|
Metal device for non-slotted caps features curved aluminum channel that fits over bill of cap for bill forward wear and secures with coiled spring that stretches around the exterior cap crown. Visors secured with integral plastic lugs.
|
|
|
|
|
|
|
|
|
|
|
|
|
Ideal for use with Jackson faceshields, the 170SB Headgear features a ratchet system that eliminates backing off by the push and turn design and a lower ratchet strap offering added comfort and strength.
45 head size adjustments and five crown adjustments.
|
Mounts visor instantly on a wide variety of non-slotted caps with integral plastic lugs. Uses clips pressed over the cap rim for firm fit; removes with thumb pressure. Not to be used with caps that have slots with rain troughs.
|
|
|
|
|
|
|
|
|
|
|
|
|
The easiest, least costly adapter to mount visors to slotted caps, with integral plastic lugs. Includes spark deflector and pivoting blades.
|
All plastic, totally dielectric device for slotted caps. Curved plastic channel fits over the bill of the cap and easily into cap slots, with internal plastic lugs to secure visors (sold separately).
|
|
|
|
|
|
|
|
|
|
|
|
|
Quick detach brackets that join any visor and spark deflector with plastic pins to any cap equipped with #87 mounting blades.
|
For top impact protection and outstanding comfort, the Vented V-Gard® Advance™ combines a lightweight polyurethane shell with cooling vents along the crown. Available in three colors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Designed to carry personal protective equipment such as gas masks, SCBA face pieces, protective suits, gloves and other personal items. Lightweight and durable. Constructed with 400 denier nylon pack cloth.
|
Replacement six point Ratchet Suspension is easy to adjust - allows the wearer to modify the fit while wearing for Full Brim Ratchet Suspension hard hats. Hard hat is NOT included.
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement six point Ratchet Suspension is easy to adjust - allows the wearer to modify the fit while wearing for all Standard Ratchet Suspension hard hats. Hard hat is NOT included.
|
Replacement six point Snap Lock suspension featuring tuck away adjustments for all day, hassle free wear for all Standard Shell Snap Lock Suspension hard hats. Hard hat is NOT included.
|
|
|
|
|
|
|
|
|
|
|
|
|
Six point Snap Lock suspension features tuck away adjustments for all day, hassle free wear. Available in six colors.
|
Six point Snap Lock suspension features tuck away adjustments for all day, hassle free wear. Available in six colors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Replacement head band for Pyramex® Hard Hats. When the foam forehead brim becomes too worn or dirty- simply replace it!
|
Workers can express patriotism with this bright, attractive designs and protect themselves at the same time. This lightweight, durable and comfortable hard hat features Fas-Trac® suspension, accessory slots and a superior finish. Meets all applicable requirements for a Type I (top impact helmet as outlined in ANSI/ISEA Z89.1-2009, Class E). Also meets ANSI/ISEA Z-89.1-2009 voluntary standard for reverse donning.
|
|
|
|
|
|
|
|
|
|
|
|
|
Workers can express patriotism with this bright, attractive designs and protect themselves at the same time. This lightweight, durable and comfortable hard hat features Fas-Trac® suspension, accessory slots and a superior finish. Meets all applicable requirements for a Type I (top impact helmet as outlined in ANSI/ISEA Z89.1-2009, Class E). Also meets ANSI/ISEA Z-89.1-2009 voluntary standard for reverse donning.
|
Help your workers stay more comfortable and more productive in hot, humid weather! Economical, soft and absorbent band comes with a securely attached elastic band.
|
|
|
|
|
|
|
|
|
|
|
|
|
Features flame retardance for added safety. Absorbent air cushioned layer lined with 100% fleecy cotton. The Velcro® fastening system is uniquely designed to fit all major brands of non suspender type headgear.
|
Features flame retardance for added safety. Absorbent air cushioned layer lined with 100% fleecy cotton. The Velcro® fastening system is uniquely designed to fit all major brands of suspender type headgear.
|
|
|
|
|
|
|
|
|
|
|
|
|
Features patented Air Flow Control™ technology for optimal attenuation across all frequencies and also snap-in ear cushions for easy maintenance. NRR: 27 dB
|
Features patented Air Flow Control™ technology for optimal attenuation across all frequencies and also snap-in ear cushions for easy maintenance. NRR: 25 dB
|
|
|
|
|
|
|
|
|
|
|
|
|
Features patented Air Flow Control™ technology for optimal attenuation across all frequencies and also snap-in ear cushions for easy maintenance. NRR: 23 dB
|
Use this Adapter to securely attach your The Uvex Bionic® Shield to most hard hats . Faceshields offer secondary protection and must be worn with safety glasses or goggles. Meets ANSI Z87+ Standards.
|
|
|
|
|
|
|
|
|
|
|
|
|
Constructed of a lightweight, one-piece injection molded high-density polyethylene. The rigid, dielectric shell works together with suspension sytems for complete head protection. Made in The U.S.A. Meets all applicable requirements for Type I (top impact) helmet as outlined in ANSI/ISEA Z89.1-2009, Class E. Also meets the ANSI/ISEA Z89.1-2009 voluntary standard for reverse donning.
Available in two suspension types and in six colors.
|
Constructed of a lightweight, one-piece injection molded high-density polyethylene. The rigid, dielectric shell works together with suspension sytems for complete head protection. Made in The U.S.A. Meets all applicable requirements for Type I (top impact) helmet as outlined in ANSI/ISEA Z89.1-2009, Class E. Also meets the ANSI/ISEA Z89.1-2009 voluntary standard for reverse donning.
Available in three suspension types and in eight colors.
|
|
|
|
|
|
|
|
|
|
|
This Six-Point American Classic Cowboy Hard Hat will spur your workers to wear their head protection even when the foreman's not around. Compliance: ANSI Z89.1, Type I, Class E, G & C. Outer shell is made in USA of high-density polyethylene that resists penetration, deflects blows to the head from falling objects, reduces danger from exposure to low and high voltage electrical conductors, is slow burning and water resistant. Available in two colors.
|
|
|
