1x1 spacer
header 1x1 spacerView Cartangle breakMy Account / Order Statusangle breakHelp1x1 spacer
1x1 spacer 1x1 spacer
1x1 spacer
1x1 spacer
1x1 spacer 1x1 spacer
1x1 spacer

Visit our Facebook page!

Click here to visit our blog!


hhollenbeck@workfitomaha.com



We accept Visa, Mastercard, and American Express

Certified Secure By Volusion, Inc.
Official PayPal Seal

Online Payments

Join our mailing list!

1x1 spacer
(Your shopping cart is empty)
You are here: Home > Clothing/Workwear > Fire & Heat Resistant
Flame Resistant Protective Apparel
Flame Resistant protective apparel can mean the difference between minor survivable burns and major life-threatening injuries. In the event of a momentary electric arc, flash fire or molten metal splash exposure, everyday non-flame resistant work clothes can ignite and will continue to burn even after the source of ignition has been removed. Untreated natural fabrics will continue to burn until the fabric is totally consumed and non-flame resistant synthetic fabrics will burn with melting and dripping, causing severe contact burns to the skin

The use of Flame Resistant Protective Apparel is for secondary protection and is designed to be worn continuously in the workplace. These products must be comfortable and fit well. They must not shrink, and most importantly, they must retain the flame resistant properties for the useful life of the garments.


Flame Resistant Fabric Materials
Proban® FR 7A
100% cotton produced with the gaseous ammonia or ammonia cure reaction. An economical product available in 9 or 11.5 ounce fabric weights and a wide range of colors: green, yellow, orange, navy blue and red. Flame resistant properties last 25 industrial washings or 50 home laundering cycles.
Nomex®, Nomex IIIA by DuPont™
93% Nomex®, 5% KEVLAR®, 2% Carbon. Inherently flame-resistant, anti-static fabric engineered to reduce nuisance static. This extremely durable, lightweight fabric is self-extinguishing, will not ignite, drip or burn. The flame resistant property cannot be degraded by laundering. Available in a number of different weights and a variety of colors.
INDURA® by Westex
100% cotton treated with a permanent flame-resistant finish. When laundered properly, the flame-resistant properties are guaranteed for the life of the garment. A wide range of colors and fabric weights are available.
TuffWeld® by Southern Mills
60% Lenzing FR™, 40% KEVLAR®. Designed for welding applications, offering good protection against constant weld spark spatter. TuffWeld® offers inherent FR protection with a high level of comfort and durability. It is lightweight and has superb wicking characteristics.
INDURA® Ultra Soft® by Westex
FR-treated 88% cotton and 12% high tenacity nylon blend. The INDURA® Ultra Soft® fabric is engineered to focus the excellent abrasion resistance of the nylon on the face of the fabric to enhance garment wear life, while the cotton fibers are focused towards the skin to optimize comfort. When laundered properly, the flame-resistant properties are guaranteed for the life of the garment. A wide range of colors and fabric weights are available.
Protera™ by DuPont™
65% Modacrylic, 33% Aramid, 2% Carbon/Nylon. Inherently flame-resistant, anti-static fabric offers excellent protection, durability and comfort. It is one of the lightest weight NFPA 70E Category 2 technologies.

Molten Iron Test
In an independent research facility, using ASTM test method F 955, two pounds of 2850° molten iron were poured from a height of 18 inches onto various fabrics. The fabrics were positioned at a 70° angle. Temperature transfer was recorded using a calorimeter. The lower the temperature rise, the more resistant the fabric is to heat.

Results of The Molten Iron Test


Arc Flash Protection

What is NFPA 70E?
NFPA 70E is the National Fire Protection Association Standard for Electrical Safety in the Workplace. Last published in February 2004, the standard is a recognized consensus standard for electrical safety work practices to safeguard employees from hazards such as shock and arc flash.
Why comply with NFPA 70E?
OSHA 29 CFR 1910.132 requires employers to conduct hazard assessments to identify hazards present, or likely to be present, that would necessitate use of personal protective equipment (PPE). Employers must select and have affected employees use the types of PPE to protect them from any hazards identified. OSHA deems the employer to be in compliance if PPE is selected using NFPA 70E Standards.
NFPA 70E - Three Ways To Analyze the Arc Flash Hazard
Employers are required to perform a flash hazard analysis in order to protect personnel from the possibility of being injured by an arc flash. The analysis shall determine the Flash Protection Boundary and the personal protective equipment that people within the Flash Protection Boundary shall use.
1. Detailed Flash Hazard Analysis
Where it is determined that work will be performed within the Flash Protection Boundary by NFPA 70E 130.3(A), the flash hazard analysis shall determine, and the employer shall document, the incident energy exposure of the worker (in calories per centimeter squared, cal/cm2). Reference NFPA 70E Annex D for information on estimating the incident energy. Upon determination and documentation of the incident energy associated with the specific task, the proper flame-resistant clothing and PPE.
2. NFPA 70E Hazard/Risk Category (HRC) Classifications and Protective Clothing and PPE Matrix
Use the NFPA 70E Table 130.7(C)(9)(a) to identify the HRC for a task. Once the HRC has been identified, NFPA 70E Table 130.7(C)(10) can help to determine the required PPE for the task.
3. NFPA 70E Annex H Simplified, Two-Category, Flame-Resistant (FR) Clothing System
The use of Table H.1 in Annex H is suggested for a simplified approach to assure adequate PPE for electrical workers within facilities with large and diverse electrical systems. The clothing systems listed in this table should be used with other PPE appropriate for the HRC.

Typical Protective Clothing Systems
Hazard/Risk
Category
Clothing Description
Required Minimum Arc Rating of PPE (cal/cm2)
0
Non-melting, flammable materials (i.e., untreated cotton, wool, rayon or silk) with a fabric weight of at least 4.5 oz./yd2
N/A
1
FR shirt and FR pants or FR coveralls
4
2
Cotton underwear plus FR shirt and FR pants
8
3
Cotton underwear plus FR shirt and FR pants, plus FR coveralls, or cotton underwear plus two FR coveralls
25
4
Cotton underwear plus FR shirt and FR pants, plus multilayer flash suit
40

Sort By:
Page of 1
10 Cal Chin Guard Face Shield Kit 12 Cal. Hooded Jacket Arc Flash Kit
Includes green-tinted face shield, attachable chin cup, hard hat bracket, and hard hat. 10 Cal/cm2.

Available in five hard hat colors.

This Hazard/Risk category 2 Arc Flash kit includes one 35'' hooded jacket, one face shield, one chin cup, one cap bracket, one pair of Class 0 rubber gloves, one pair of leather protector gloves, one glove bag and one gear bag.
2-Ply CarbonX® Ultimate Hood 50'' Aluminized Acrysil Coat
The CarbonX® Ultimate flared style hood provides maximum coverage.  Our hood features flat stitching and seamless chin area for better fit and comfort.  Has an ATPV of 20 cal/cm2. Aluminized protective wear provides excellent protection from radiant heat. Constructed of 16 oz. Aluminized Acrysil, the 50'' coat features snap front and cuffs. Made in The U.S.A.

Available in three sizes.

Aluminized Acrysil Bib Tie Apron Aluminized Norbest 913™ Deluxe Coat
Aluminized protective wear provides excellent protection from radiant heat. Constructed of 16 oz. Aluminized Acysil, the apron features a leather strap with slide snap. Made in The U.S.A.

Available in two sizes.

A unique blend of carbon and DuPont™ KEVLAR® brand fiber, Norbest 13 oz. aluminized fabric offers maximum protection against heat, sparks and molten metal splash.

Available in three sizes.

Aluminized Norbest 913™ Sleeves (Pair) Aluminized Thermobest™ 19 oz. Fitted Hood
Aluminized Norbest 913™ Sleeves provide superior protection from heat, sparks and molten metal splash.  18'' length.   Made in The U.S.A. Aluminized Thermobest™ 19 oz. fitted hood has an adjustable ratchet suspension system and replaceable window with gold film to reflect heat.  Made in U.S.A.
Aluminized Thermobest™ Leggings (Pair) Aluminized Thermobest™ Spats (Pair)
Aluminized protective wear provides excellent protection from radiant heat. Constructed of 19 oz. Aluminized Acysil, the leggings have Velcro® closures down the back. Made in The U.S.A.

Available in two sizes.

Aluminized protective wear provides excellent protection from radiant heat.  Constructed of 19 oz. Aluminized Acysil, the protective spats have Velcro® closures down the back.  Made in The U.S.A.
ANSI Class II Flame Resistant Luminator™ Safety Vest ANSI Class II Flame Resistant Silver-Striped Lime Mesh Safety Vest
Class 2, flame-resistant 100% modacrylic lime safety vest with three pockets, hook & loop front closure and a 3'' reinforced D-ring opening in the upper back. Features 3M® Scotchlite® 2'' retro-reflective silver stripes and limited flammability (complies with ASTM F1506).

Available in six sizes.

Class 2, 100% lime mesh safety vest with 1 inside pocket and hook & loop for front closure and side/shoulder break-away. Features 3M® Scotchlite® 2'' reflective silver stripes and limited flammability (Flame Resistant to ASTM D6413).

Available in six sizes.

Arc Guard™ Level 2 Kit Arc Guard™ Level 2 Kit (No Gloves)
Arc Guard™ Level 2 Kit
Our Price: $624.95
The Arc Guard™ Level 2 Kit Level 2 Kit consists of everything you need in terms of personal protection for NFPA 70E Hazard/Risk Category 2 in one convenient package. Level 2 Kit includes 11 cal/cm2, navy blue INDURA® Ultra Soft® coveralls, hard cap with faceshield and chin cup, faceshield unit bag, safety glasses, 11'' Class 0 rubber insulating gloves, 10'' leather protectors, canvas glove bag and gear bag for easy storage.

Available in three sizes and two glove sizes.

The Arc Guard™ Level 2 Kit Level 2 Kit consists of everything you need in terms of personal protection for NFPA 70E Hazard/Risk Category 2, except protective gloves, in one convenient package. Level 2 Kit includes 11 cal/cm2, navy blue INDURA® Ultra Soft® coveralls, hard cap with faceshield and chin cup, faceshield unit bag, safety glasses, and gear bag for easy storage.

Available in three sizes.

Arc Guard™ Level 4 Kit Arc Rated Faceshield
Arc Guard™ Level 4 Kit
Our Price: $1,095.95
Arc Rated Faceshield
Our Price: $91.95
The Arc Guard™ Level 4 Kit consists of everything you need in terms of personal protection for NFPA 70E Hazard/Risk Category 4 in one convenient package. Level 4 Kit includes 40 cal/cm2, navy blue INDURA® Ultra Soft® short coat/bib overall combo and arc hood unit with faceshield and universal hard cap adapter, hood bag, safety glasses, 14'' Class 2 rubber insulating gloves, 12'' leather protectors, canvas glove bag, and gear bag for easy storage. Shortcoat, bib overalls and arc hood should be worn together for full body protection. The 32'' length short coat features a flame resistant front closure with flame resistant knit wrists. The bib overalls feature quick disconnect shoulder straps, a flame resistant fly closure and flame resistant calf closures for easy foot entry. The arc hood includes a hard cap and features a light enhancing green faceshield that is ANSI Z87.1 approved.

Available in three sizes and two glove sizes (gloves optional).

This 10 cal/cm2 faceshield and (optional) hard hat combination provides added protection to the head, face and eyes for NFPA 70E Hazard/Risk Category 2.  The anti-fog light enhancing green faceshield features 70% visual light transmission (VLT) and provides an excellent field of view for the worker.  Chin cup provides added protection for chin and neck areas.  Meets NFPA 70E and ANSI Z87.1 Standards.  Made in The U.S.A.
Blue Quilted Liner Brown Duck Quilt Lined Flame Retardant Coat
Blue Quilted Liner
Our Price: $7.95
Our most popular liner, featuring a quilted nylon tricot outer shell with a soft fleece lining. It's warm yet lightweight, and flame retardant (until liner is washed) as an added bonus.

One size fits most.

11 oz. INDURA® Ultra Soft® shell and 10.5 oz. Moda Quilt® lining make up this 30'' Brown Duck Quilt-Lined Coat. Meets hazard/risk category 4 with an ATPV arc rating of 47 cal/cm2.

Available in seven sizes.

Brown Duck Quilt Lined Flame Retardant Coat Class 0 Glove Kit
Class 0 Glove Kit
Our Price: $89.95

11 oz. INDURA® Ultra Soft® shell and 10.5 oz. Moda Quilt® lining make up these Brown Duck Quilt-Lined Bib Overalls. Features three pockets, adjustable shoulder straps and snap closures at ankles and front. Meets hazard/risk category 4 with an ATPV arc rating of 47 cal/cm2.

Available in eight sizes.

Comes complete with Class 0 Rubber Gloves, Leather Protectors and handy glove bag.

Available in five glove sizes

Class 2 Glove Kit Classic Plus Black Flame Resistant PVC/Polyester Rider Coat
Class 2 Glove Kit
Our Price: $199.95
Comes complete with Class 2 Rubber Gloves, Leather Protectors and handy glove bag.

Available in five glove sizes

Made of the same durable PVC/Polyester broadloom material as the Classic Series, but with a few added features. Bottom of coat can be separated and fastened into pants. Flame Resistant to ASTM D-6413 Standard. Features detachable drawstring hood, corduroy collar, cape ventilated back, raglan sleeves, 2 pockets and black plastic snaps down the front and at the wrists.

Available in seven sizes.

Classic Yellow PVC/Polyester Three-Piece Flame Resistant Rain Suit Concord Neoprene/Nylon Flame Retardant Bib Overalls
The Classic series rainwear combines the strength and waterproof qualities of PVC with the durability of a polyester backing. Come back to the Classics for your protective wear needs! Includes rain jacket with detachable hood and adjustable suspenders. Flame resistant to ASTM D-6413 Standard. Features drawstring hood, rounded collar, raglan sleeves, 2 pockets, reinforced crotch and black plastic snaps at fly, wrists, waist and ankles.

Available in eight sizes.

When you need rain wear that will work just as hard as you do, fly high with our Concord series rain wear. Tough, heavy duty yellow neoprene material is resistant to snags and abrasion and the hard working nylon scrim backing resists rips and tears. Premium quality for tough jobs! Features 0.35mm premium quality yellow neoprene/nylon material with double stitched and taped seams, easy release snaps, black plastic take up snaps at ankles and waist, and no fly front. Flame Resistant to ASTM D-6413 and NFPA 701 Standards.

Available in eight sizes.

Concord Neoprene/Nylon Flame Retardant Bib Overalls With Fly Closure Concord Neoprene/Nylon Flame Retardant Hooded Rain Jacket
When you need rain wear that will work just as hard as you do, fly high with our Concord series rain wear. Tough, heavy duty yellow neoprene material is resistant to snags and abrasion and the hard working nylon scrim backing resists rips and tears. Premium quality for tough jobs! Features 0.35mm premium quality yellow neoprene/nylon material with double stitched and taped seams, easy release snaps, black plastic take up snaps at ankles and waist, and black plastic snap fly front. Flame Resistant to ASTM D-6413 and NFPA 701 Standards.

Available in six sizes.

When you need rain wear that will work just as hard as you do, fly high with our Concord series rain wear. Tough, heavy duty yellow neoprene material is resistant to snags and abrasion and the hard working nylon scrim backing resists rips and tears. Premium quality for tough jobs! Features premium quality neoprene with a nylon scrim backing, limited flammability (test method ASTM D-6413 and NFPA 701), chemical resistance, black plastic snap fly front, black plastic take up snaps at wrists, and raglan sleeves.

Available in seven sizes.

Concord Neoprene/Nylon Flame Retardant Rain Coat Concord Neoprene/Nylon Flame Retardant Rain Hood
When you need rain wear that will work just as hard as you do, fly high with our Concord series rain wear. Tough, heavy duty yellow neoprene material is resistant to snags and abrasion and the hard working nylon scrim backing resists rips and tears. Premium quality for tough jobs! Features premium quality neoprene with a nylon scrim backing, limited flammability (test method ASTM D-6413 and NFPA 701), chemical resistance, black plastic snap fly front, black plastic take up snaps at wrists, two pockets and raglan sleeves.

Available in six sizes.

When you need rain wear that will work just as hard as you do, fly high with our Concord series rain wear. Tough, heavy duty yellow neoprene material is resistant to snags and abrasion and the hard working nylon scrim backing resists rips and tears. Premium quality for tough jobs! Features 0.35mm premium quality yellow neoprene/nylon material with double stitched and taped seams. Flame Resistant to ASTM D-6413 and NFPA 701 Standards.

One size fits most.

Concord Neoprene/Nylon Flame Retardant Rain Jacket Concord Yellow Neoprene/Nylon Flame Retardant Apron
When you need rain wear that will work just as hard as you do, fly high with our Concord series rain wear. Tough, heavy duty yellow neoprene material is resistant to snags and abrasion and the hard working nylon scrim backing resists rips and tears. Premium quality for tough jobs! Features premium quality neoprene with a nylon scrim backing, limited flammability (test method ASTM D-6413 and NFPA 701), chemical resistance, black plastic snap fly front, black plastic take up snaps at wrists, and raglan sleeves.

Available in seven sizes.

Many jobs require protection on your chest, stomach and legs but may not require a full suit. Try this heavy-duty apron to protect yourself from chemicals, dirty gritty grimy work areas and even abrasive situations, as well as excellent resistance to solvents, oils and acids.  Flame Retardant to ASTM D-6412-08 Standards.  Features 0.35mm yellow neoprene/RipStop vinyl material with tucked and sewn seams.  Features three 1'' x 42'' cotton webbing ties, metal grommets for neck and side ties and an extra 18'' x 20'' belly patch sewn onto apron.
Cyclone Yellow PVC/Nylon Flame Resistant Bib Pants Cyclone Yellow PVC/Nylon Flame Resistant Hooded Rain Jacket
Made of a nylon material that is an excellent choice for tough and rugged rain wear, offering a durable backing with awesome rip resistance and abrasion resistance as well as excellent resistance to most industrial oils, acids and chemicals. Prepare for the storm with Cyclone! Limited Flammability, tested in accordance with ASTM D-6413. Features thick wave-lock nylon material coated on both sides with heavy weight PVC, black plastic take up snaps at ankles, black plastic snap fly front and reinforced crotch.

Available in five sizes.

Made of a nylon material that is an excellent choice for tough and rugged rain wear, offering a durable backing with awesome rip resistance and abrasion resistance as well as excellent resistance to most industrial oils, acids and chemicals. Prepare for the storm with Cyclone! Limited Flammability, tested in accordance with ASTM D-6413. Features thick wave-lock nylon material coated on both sides with heavy weight PVC, black plastic take up snap closures, raglan sleeves and detachable hood.

Available in five sizes.

Cyclone Yellow PVC/Nylon Flame Resistant Waist Pants Deluxe FR Contractor Coveralls
Made of a nylon material that is an excellent choice for tough and rugged rain wear, offering a durable backing with awesome rip resistance and abrasion resistance as well as excellent resistance to most industrial oils, acids and chemicals. Prepare for the storm with Cyclone! Limited Flammability, tested in accordance with ASTM D-6413. Features thick wave-lock nylon material coated on both sides with heavy weight PVC, black plastic take up snaps at ankles, black plastic snap fly front and reinforced crotch.

Available in five sizes.

These flame-resistant coveralls are made with Max Comfort™ 7 oz. 88% cotton/12% nylon FR twill fabric, sewn with Nomex FR thread.

Available in five colors and a variety of sizes.

Deluxe FR Reflective Contractor Coveralls Deluxe Proban® FR7A Liner

These flame-resistant coveralls are made with Max Comfort™ 7 oz. 88% cotton/12% nylon FR twill fabric, sewn with Nomex FR thread.

Available in two colors and a variety of sizes.

100% cotton Proban® FR7A shell will fleece inner lining, and flame-retardant for 25-50 washings, with Nomex® thread.

One size fits most.

Denim Rugged Twill 12-13 oz. Work Pants Dominator Green PVC/Polyester Flame Resistant Bib Overalls
These 12-13 oz. Denim Rugged Twill INDURA® Ultra Soft® (88% cotton, 12% nylon) blue work pants feature front swing pockets, back patch pockets and front zipper closure. Meets hazard/risk category 2 with an ATPV arc rating of 10 cal/cm2.

Please indicate desired waist and inseam sizes.

This thick heavyweight dominates its division! The Dominator offers heavy duty protection and chemical splash resistance. Features roomy construction, limited flammability to ASTM D-6413 Standard, great protection against many chemicals and acids, reinforced crotch and plastic snaps at ankles and waist.

Available in eight sizes.

Dominator Green PVC/Polyester Flame Resistant Rain Jacket With Attached Hood Dominator Green PVC/Polyester Flame Resistant Rain Jacket With Detachable Hood
This thick heavyweight dominates its division! The Dominator offers heavy duty protection and chemical splash resistance. Features roomy construction, limited flammability to ASTM D-6413 Standard, great protection against many chemicals and acids, attached drawstring hood, front zipper and raglan sleeves.

Available in eight sizes.

This thick heavyweight dominates its division! The Dominator offers heavy duty protection and chemical splash resistance. Features roomy construction, limited flammability to ASTM D-6413 Standard, great protection against many chemicals and acids, detachable drawstring hood, front zipper and raglan sleeves.

Available in six sizes.

Dominator Green PVC/Polyester Flame Resistant Rain Suit Dominator Green PVC/Polyester Flame Resistant Rain Suit With Pant Cuff
This thick heavyweight dominates its division! The Dominator offers heavy duty protection and chemical splash resistance. Features roomy construction, limited flammability to ASTM D-6413 Standard, great protection against many chemicals and acids, attached drawstring hood, reinforced crotch and plastic snaps at wrists and ankles.

Available in seven sizes.

This thick heavyweight dominates its division! The Dominator offers heavy duty protection and chemical splash resistance. Features roomy construction, limited flammability to ASTM D-6413 Standard, great protection against many chemicals and acids, attached drawstring hood, reinforced crotch, plastic snaps at wrists and ankles, and 10'' insert cuffs with elastic in bottoms of pants.

Available in seven sizes.

Dominator Green PVC/Polyester Flame Resistant Two-Piece Rain Suit Dominator II Green PVC/Polyester Flame Retardant Apron
This thick heavyweight dominates its division! The Dominator offers heavy duty protection and chemical splash resistance. Features hooded jacket with adjustable suspenders, roomy construction, limited flammability to ASTM D-6413 Standard, great protection against many chemicals and acids, attached drawstring hood, reinforced crotch and plastic snaps at ankles.

Available in ten sizes.

Many jobs require protection on your chest, stomach and legs but may not require a full suit. Try these heavy-duty aprons to protect yourself from oils, chemicals, dirty gritty grimy work areas and even abrasive situations.
This apron is also Flame Retardant to ASTM D-6413 Standards. Made from 0.45mm high-quality green PVC/Polyester.  Features sewn edges, brass grommets, two 30'' waist ties and a 26'' neck strap with safety release snap.
DuPont™ Tychem® ThermoPro Coveralls Fire Entry Suit
Fire Entry Suit
Our Price: $4,600.00
The patented combination of Tychem® chemical barrier and DuPont™ NOMEX® thermal protection provides flash fire and liquid splash protection in a single-layer garment.  Constructed for heavy use, yet lightweight and easy to wear, these coveralls are perfect for HazMat response as well as industrial and domestic preparedness situations where flash fires are likely to occur. The ultimate insulated suit, constructed of ZETEX PLUS® high temperature fabric for maximum protection in total flame entry.  Fire Entry Suit with extended back to accommodate breathing apparatus. Price includes 1 Heavy-Duty Storage Trunk.
Flame Retardant Sleeves (2 1/4'' Elastic) (Pair) Flame Retardant Sleeves (Snap Wrist) (Pair)
Westex® Proban® FR7A® flame retardant 100% cotton is designed for light-duty welding only and will self extinguish when exposed to flame or thermal ignition sources, with 2 1/4'' elastic at both ends of each sleeve. The 9 oz. fabric will maintain its flame resistance for up to 50 home washings.

Available in two sizes.

Westex® Proban® FR7A® flame retardant 100% cotton is designed for light-duty welding only and will self extinguish when exposed to flame or thermal ignition sources, with Snap at both wrists.  The 9 oz., 18'' fabric will maintain its flame resistance for up to 50 home washings.
Flame Retardant Sleeves (Standard Elastic) (Pair) FR Contractor Coveralls
FR Contractor Coveralls
Our Price: $88.95
Westex® Proban® FR7A® flame retardant 100% cotton is designed for light-duty welding only and will self extinguish when exposed to flame or thermal ignition sources, with standard elastic at both ends of each sleeve. The 9 oz. fabric will maintain its flame resistance for up to 50 home washings.

Available in two sizes.

These flame-resistant coveralls are made with Max Comfort™ 7 oz. 100% cotton FR twill fabric, sewn with Nomex FR thread.

Available in five colors and a variety of sizes.

FR Relaxed Fit Jeans Hydroblast Yellow Neoprene/Nylon Flame Retardant Rain Suit
FR Relaxed Fit Jeans
Our Price: $69.95

These flame-resistant relaxed fit jeans are made with Max Comfort™ 14.75 oz. heavy weight durable FR indigo denim.

Available in twelve Waist Sizes and four Inseam Lengths.

Filled with features that keep you dry in high pressure spraying applications or in driving, windblown rain. Flame Retardant, 0.35mm yellow Neoprene/Nylon rain suit with double stitched and taped seams. Includes hooded rain jacket and adjustable suspenders. Features adjustable closures to ensure watertight seals at all openings.

Available in eight sizes.

Hydroblast Yellow PVC/Nylon Flame Retardant Rain Suit INDURA® Flame Resistant Coveralls
Filled with features that keep you dry in high pressure spraying applications or in driving, windblown rain. 0.28mm yellow PVC/Nylon Scrim/PVC rain suit with welded seams. Includes hooded rain jacket and overalls. Features adjustable closures to ensure watertight seals at all openings, raglan sleeves, and reinforced crotch. Flame Retardant to NFPA 701 Standard.

Available in seven sizes.

The INDURA® Coveralls are the ideal, comfortable choice for constant wear in a workplace where exposure to flame or other thermal sources is occasional.

Available in two colors and six sizes.

INDURA® Ultra Soft® 7 oz. Work Shirt INDURA® Ultra Soft® Arc Rated Balaclava Hood
This 7 oz. INDURA® Ultra Soft® (88% cotton, 12% nylon) Industrial Shirt features long sleeves, two front open-top pockets and button closures. Meets hazard/risk category 2 with an arc rating of 8.7 cal/cm2.

Available in three sizes and two colors.

This flame-resistant navy balaclava hood is arc rated, providing extra protection for the head and neck.  Complies with NFPA 70E Hazard/Risk Category 2.  The new rib knitting provides a very lightweight and economical choice featuring the comfort of cotton.  Arc rated to 12.1 cal/cm2.  Meets NFPA 70E, ASTM 1506-2002a and OSHA 29 CFR 1910.269 Standards. Made in The U.S.A.
INDURA® Ultra Soft® Fleece Full Zip Hooded Sweatshirt INDURA® Ultra Soft® Fleece Hooded Sweatshirt
This 10 oz. INDURA® Ultra Soft® (88% cotton, 12% nylon) Hooded Sweatshirt features a drawstring hood, long sleeves, two front pockets, front zipper closure and rib knit cuffs & waist. Sewn with Nomex® thread. Meets hazard/risk category 2 with an ATPV arc rating of 17.7 cal/cm2 (21.8 EBT).

Available in eight sizes.

This 10 oz. INDURA® Ultra Soft® Fleece (88% cotton, 12% nylon) Hooded Sweatshirt features a drawstring hood, long sleeves, two front pockets and rib knit cuffs & waist. Sewn with Nomex® thread. Meets hazard/risk category 2 with an ATPV arc rating of 17.7 cal/cm2 (21.8 EBT).

Available in eight sizes.

INDURA® Ultra Soft® Fleece Sweatshirt Kiln Suit
Kiln Suit
Our Price: $4,300.00
This 10 oz. INDURA® Ultra Soft® Fleece (88% cotton, 12% nylon) Crewneck Sweatshirt features long sleeves and rib knit cuffs & waist. Sewn with Nomex® thread. Meets hazard/risk category 2 with an ATPV arc rating of 17.7 cal/cm2 (21.8 EBT).

Available in seven sizes.

Highly insulated suit with aluminized ZETEX® fabric outer shell and internal vapor barrier.  For use up to 800° F (426° C) ambient temperatures. Includes hood, coat, pants, boots, mitts and storage locker.
Knit Nomex® Short Hood Leather Bib Apron
Knit Nomex® Short Hood
Our Price: $14.95
Leather Bib Apron
Our Price: $34.95
6 oz. knit Nomex® short-style hood. Helps protect against flame and reduces static electricity.

Available in two colors and two weights.

Bourbon-brown leather bib apron features crossed back straps for comfort, a side-release buckle for easy on/off, and two chest pockets.

Available in four sizes.

Leather Jacket Leather Leggings (Pair)
Leather Jacket
Our Price: $70.95
Leather Leggings (Pair)
Our Price: $51.95
Specially tanned for heat resistance, this 30'' leather jacket is made of soft, durable bourbon-brown side split leather. KEVLAR® double lock-stitched seams add heat resistance and strength. Underarm gussets allow freedom of movement while adjustable snaps at wrists and back customize fit. Features include convenient outside pocket, soapstone pockets on each sleeve, plated hardware to prevent rust, leather reinforced black anodized snaps and rivet reinforced stress points.

Available in five sizes.

Bicycle style leggings constructed of premium side split cowhide that tucks into a spring steel clip to form a sturdy frame around the leg to keep legging in place.  This design allows the leggings to be adjustable and readily removable.  KEVLAR® stitching enhances heat resistance.
Leather/Flame Retardant Jacket Lightweight Flame Retardant Jacket
A great combination of flame retardant cotton and side split leather for comfort and protection in one garment. Workers will appreciate the addition of cotton in the jacket's design, making the garment cooler. The body of the 30'' jacket is a 9 oz. royal blue flame retardant 100% cotton, Proban® FR7A®. The jacket features an inside pocket for small items, a soapstone pocket on each sleeve, and anodized snap buttons.

Available in five sizes.

Protect workers from sudden flame exposure and light sparks. Flame retardant jackets are made of Westex® Proban® FR7A® 100% cotton fabric. Proban® FR7A® is designed to self extinguish when exposed to flame or thermal ignition sources, and designed for light welding only. The fabric will not shrink, melt or drip molten residues. Jackets are cool, comfortable and washable. Lightweight 9 oz. cotton.

Available in five sizes.


Lined Approach Suit Long Sleeve FR Work Shirt
Lined Approach Suit
Our Price: $2,200.00
Long Sleeve FR Work Shirt
Our Price: $61.95
Insulated suit with aluminized ZETEX® fabric outer shell and double vapor barrier. Should be used when steam and volatile materials present an additional hazard.  Suitable for short duration in ambient temperatures up to 500° F (260° C). Includes hood, coat, pants, boots, mitts and heavy-duty storage trunk.

These flame-resistant coveralls are made with Max Comfort™ 7 oz. 88% cotton/12% nylon FR twill fabric, sewn with Nomex FR thread.

Available in two colors and a variety of sizes.

Luminator™ Class III Silver-Striped Flame Retardant Lime Rain Coat Luminator™ Class III Silver-Striped Flame Retardant Lime Rain Suit
Be seen in this 51.5'' rain coat that is made of high visibility 0.40mm lime polyurethane on knitted cotton/polyester backing and 3M® reflective silver stripes. Limited flammability tested to specifications of ASTM D6413-08 Standard. Features a roll-up hood, snap closures and patch pockets.

Available in six sizes.

Be seen in these full suits that are made of high visibility 0.40mm lime polyurethane on knitted cotton/polyester backing and 3M® reflective silver stripes. Limited flammability tested to specifications of ASTM D6413-08 Standard. Features jacket with roll-up hood and elastic waist pants.

Available in six sizes.

Luminator™ Class III Silver-Striped Flame Retardant Lime/Black Rain Suit Luminator™ Silver-Striped Flame Retardant Orange Rain Jacket
Be seen in these full suits that are made of high visibility 0.40mm fluorescent lime polyurethane on knitted cotton/polyester backing and 3M® reflective silver stripes, with black material beneath the stripes to hide dirt. Limited flammability tested to specifications of ASTM D6413-08 Standard. Features jacket with roll-up hood and elastic waist pants.

Available in six sizes.

Be seen in this high-visibility, flame retardant rain jacket. Tested in accordance with ASTM D6413-08 and NFPA 701. Includes 0.28mm fluorescent yellow PVC/nylon scrim/PVC jacket with detachable hood. Features black plastic storm fly front closure, black plastic take up snaps on wrists, and Reflexite™ silver stripes.

Available in four sizes.

Luminator™ Silver-Striped Flame Retardant Yellow Overalls Luminator™ Silver-Striped Flame Retardant Yellow Rain Jacket
Be seen in these high-visibility, flame retardant overalls. Tested in accordance with ASTM D6413-08 and NFPA 701. Includes 0.28mm fluorescent yellow PVC/nylon scrim/PVC bib overalls. Features black plastic storm fly front closure, black plastic take up snaps on waist and ankles, and Reflexite™ silver stripes.

Available in six sizes.

Be seen in this high-visibility, flame retardant rain jacket. Tested in accordance with ASTM D6413-08 and NFPA 701. Includes 0.28mm fluorescent yellow PVC/nylon scrim/PVC jacket with detachable hood. Features black plastic storm fly front closure, black plastic take up snaps on wrists, and Reflexite™ silver stripes.

Available in four sizes.

Master Series 70E Category 4 Jacket Master Series 70E Category 4 Over Pant
The Master Series Arc Flash clothing line is our most advanced design and fabric combination for NFPA 70E HRC 4 protection. Lightweight and durable, this 35'' jacket features adjustable elastic at the waist.

Available in two arc rating levels and eight sizes.

The Master Series Arc Flash clothing line is our most advanced design and fabric combination for NFPA 70E HRC 4 protection. The 44 cal/cm2 version of this product is the lightest HRC4 pair of pants on the market today. Lightweight and durable, these pants feature adjustable elastic pulls at the waist and leg gussets for easy on/off.

Available in two arc rating levels and eight sizes.

Master Series 70E Category 4 Overhood Memphis™ 18'' Leather Welding Sleeves (Pair)
The Master Series Arc Flash clothing line is our most advanced design and fabric combination for NFPA 70E HRC 4 protection. Lighweight and durable, this hood features a unique ''2-to-4 change'' design.

Available in two arc rating levels.

Often during welding applications, the arms are the closest part of your body to the action and often take the most abuse. These 18'' rough and tough select gray split cow leather welding sleeves will protect your arms from the heat, sparks, slag, and spatter.  Sewn with Kevlar® for added durability. Features adjustable snaps at both ends for a snug fit, offering protection from above the elbow to the wrists.
Memphis™ 30'' Welding Leather Jacket Memphis™ Goatskin Hi-Vis Gauntlet Cuff Multi-Task Gloves (Pair)
This 30'' jacket will provide outstanding protection from neck to waist from heat, sparks, slag and cuts. Features select grade side split gray cow leather with riveted anodized snaps, one large inside pocket, one soapstone pocket on the left sleeve, double locked Kevlar® stitching and adjustable snaps at wrists and waist.

Available in five sizes.

Multi-Task style glove with white premium grade grain goatskin leather palm, limited flammability and high-visibility lime Spandex back, TPR cage on back and fingers, 3" neoprene gauntlet cuff, and wing thumbs.

Available in three sizes.

Memphis™ Welding Leather Bib Memphis™ Welding Leather Bib Apron
The select grade gray side split cow leather of this bib offers outstanding protection from heat, sparks, slag and cuts. Features riveted anodized snaps, Kevlar® stitching for added durability and a quick release plastic buckle that attaches around the torso for a secure fit. Designed with snaps to attach to a Memphis™ Welding Leather Cape Jacket (sold separately).

Available in two lengths.

When the heat is on and the sparks are flyin', this select grade gray split cow leather offers outstanding protection from heat, sparks, slag and cuts. Features Kevlar® stitching for added durability, riveting in all major stress points, one large front chest pocket, two ''D'' rings on the front to hold accessories and cross back strap with quick release buckle.

Available in three sizes.

Memphis™ Welding Leather Blanket Memphis™ Welding Leather Cape Jacket
This unlined side split gray cow leather blanket offers outstanding protection from heat, sparks, slag and cuts.  Features Kevlar® stitching for added durability. This jacket will provide outstanding protection from heat, sparks, slag and cuts. Features select grade side split gray cow leather with riveted anodized snaps, two soapstone pockets on the sleeves, double locked Kevlar® stitching and adjustable snaps at wrists. Designed with snaps to attach to a Memphis™ Welding Leather Bib (sold separately).

Available in five sizes.

Memphis™ Welding Leather Chaps Memphis™ Welding Leather Rod Holder
When the heat is on and the sparks are flyin', this select grade gray side split cow leather offers outstanding protection from heat, sparks, slag, and cuts. Features Kevlar® stitching for added durability, riveting in all major stress points and flame retardant treated green waist and leg straps with quick release buckles.

One size fits most.

Keep your tools handy with this select grade gray side split cow leather rod holder. Features a reinforced bottom, spring clip and Kevlar® stitching for added durability.

One size fits most.

Memphis™ Welding Leather Shoe Protectors (Pair) Memphis™ Welding Leather Sleeves w/ Neck Straps (Pair)
These select grade gray side split cow leather shoe protectors offer outstanding protection from heat, sparks, slag and cuts. Features adjustable straps, riveting at all major stress points and Kevlar® stitching for added durability.

One size fits most.

Often during welding applications, the arms are the closest part of your body to the action and often take the most abuse. These rough and tough select grade gray side split cow leather welding sleeves will protect your arms from the heat, sparks, slag, spatter and cuts. Sewn with Kevlar® for added durability. Also features adjustable snaps at both ends for snug fit, full shoulder to wrist protection, support sling with adjustable straps and quick release buckle.

Available in two lengths.

Memphis™ Welding Leather Split-Leg Apron Memphis™ Welding Leather Waist Apron
When the heat is on and the sparks are flyin', this select grade gray split cow leather offers outstanding protection from heat, sparks, slag and cuts. Features Kevlar® stitching for added durability, quick release buckles down legs, riveting in all major stress points, one large front chest pocket, two ''D'' rings on the front to hold accessories and cross back straps with quick release buckle.

Available in two sizes.

The select grade gray side split cow leather of this apron offers outstanding protection from heat, sparks, slag and cuts. Features heavy duty waist strap with quick release buckle and Kevlar® stitching for added durability.

Available in two lengths.

Mustang™ Reinforced Welders Gloves (12 Pairs) Navigator Yellow PU/Nylon Flame Resistant Bib Pants
Pearly gray select heavy side cow leather gloves. Sewn with super-strong, heat-resistant DuPont KEVLAR® thread. Features 8-ounce full-sock cotton jersey lining with black flame resistant cuff lining, full welting on all seams, self-hemmed cuffs, one-piece 13'' glove back, extra-large die cut gunn pattern and wing thumb.

Currently available only in Extra-Large.

Never feel weighted down because of wearing rain wear long term! This Polyurethane/Nylon material is very strong, durable, comfortable, but lightweight, offering long wear with less body fatigue. Features high quality nylon taffeta fabric with polyurethane coating, limited flammability (tested in accordance with NFPA 701), double sewn and tape seams, plastic snap closures and fly front.

Available in six sizes.

Navigator Yellow PU/Nylon Flame Resistant Hooded Rain Jacket Navigator Yellow PU/Nylon Flame Resistant Rain Coat
Never feel weighted down because of wearing rain wear long term! This Polyurethane/Nylon material is very strong, durable, comfortable, but lightweight, offering long wear with less body fatigue. Features high quality nylon taffeta fabric with polyurethane coating, limited flammability (tested in accordance with NFPA 701), double sewn and tape seams, plastic snap closures and detachable hood.

Available in six sizes.

Never feel weighted down because of wearing rain wear long term! This Polyurethane/Nylon material is very strong, durable, comfortable, but lightweight, offering long wear with less body fatigue. Features high quality nylon taffeta fabric with polyurethane coating, limited flammability (tested in accordance with NFPA 701), double sewn and taped seams, plastic snap closures and detachable hood.

Available in five sizes.

Nomex® 2-Ply NFPA Hood Nomex® IIIA Coveralls
Nomex® 2-Ply NFPA Hood
Our Price: $25.95
Nomex® IIIA Coveralls
Our Price: $99.95
2-ply knit Nomex® hood with bib.  Offers heat and flame protection while keeping you dry and cool. This white hood is flame resistant with long cut style to offer maximum protection for the face and head. Face and head area is 2-ply, while bib is single ply. This hood also meets NFPA 1971 requirements, and is 10.1 cal/cm2. Nomex® IIIA from DuPont® is an inherently flame resistant fabric. This aramid and static dissipative fiber blend helps shield the wearer from flames, flash fires and electric arcs. Nomex® IIIA clothing is extremely durable, lightweight and inherently flame resistant. This standard coverall design features six pockets (two breast pockets, two rear pockets, two front pockets), covered snap front and elasticized waistband.

Available in two weights, two colors and seven sizes.

NSA INDURA® Ultra Soft® Coveralls NSA INDURA® Ultra Soft® Hooded Sweatshirt
9 oz. INDURA® Ultra Soft® full featured navy coveralls have an elastic waistband, by-swing back allowing full shoulder and arm movement, wide pass through pocket openings with concealed snap and concealed brass zipper front closure. Meets hazard/risk category 2 with an arc rating of 12.4 cal/cm2.

Available in three sizes.

This 11 oz. INDURA® Ultra Soft® Fleece Hooded Pullover Sweatshirt Jacket meets NFPA 70E hazard/risk category 2 with an arc rating of 21.8 cal/cm2 and provides additional protection and warmth for fall and winter months. The classic navy hooded sweatshirt features a drawstring hood and a front pouch pocket. The flame resistance of INDURA® Ultra Soft® is guaranteed for the life of the garment regardless of the number of servicings in either home or industrial laundering, provided the manufacturers' laundering instructions are followed. Meets NFPA 70E, ASTM 1506-2002a and OSHA 29 CFR 1910.269 Standards. Made in The U.S.A.

Available in four sizes and two styles.

NSA INDURA® Ultra Soft® Knit Henley Shirt NSA INDURA® Ultra Soft® Knit Long-Sleeve T-Shirt
With the proven protection of INDURA® Ultra Soft® in a comfortable interlock knit shirt that meets NFPA 70E hazard/risk category 2 these 6.5 oz. These navy INDURA® Ultra Soft® Henly Shirts are arc rated to 10.9 cal/cm2. Features long-sleeves, a three-button neck placket and a left breast pocket. Meets NFPA 70E, ASTM 1506-2002a and OSHA 29 CFR 1910.269 Standards. Made in The U.S.A.

Available in three sizes

With the proven protection of INDURA® Ultra Soft® in a comfortable interlock knit shirt that meets NFPA 70E hazard/risk category 2 these 6.5 oz. These gray INDURA® Ultra Soft® T-shirts are arc rated to 10.9 cal/cm2. Features long-sleeves and a left breast pocket. Meets NFPA 70E, ASTM 1506-2002a and OSHA 29 CFR 1910.269 Standards. Made in The U.S.A.

Available in three sizes

PBI/Rayon Balaclava Knitted Hood Personal Protective Equipment Duffel Bag
Designed to protect the head, neck and face in moderately high-heat environments, this balaclava hood provides good heat and flame resistance while offering more flexibility and visibility than aluminized hoods.  Made of PBI/Rayon, which is made 80% flame-retardant rayon and 20% PBI with a double-knit top and a single-layered knit bib.  Made in The U.S.A. Designed to carry personal protective equipment such as gas masks, SCBA face pieces, protective suits, gloves and other personal items.  Lightweight and durable. Constructed with 400 denier nylon pack cloth.
PRO-SHIELD™ PRO-SHIELD™
PRO-SHIELD™
Our Price: $89.95
PRO-SHIELD™ Storage Bag
Our Price: $33.95
The PRO-SHIELD™, a combination faceshield and hard cap, is designed specifically for arc flash protection and has an ATPV (Arc Thermal Protective Value) rating of 10 cal/cm2 when used with included chin cup and 8 cal/cm2 without chin cup.  The 70%  Visual Light Transmission (VLT) lenses have the best VLT available in the industry. The fleece interior cotton canvas Storage Bag features a drawstring closure for protection during transportation and storage of the Salisbury PRO-SHIELD™.
Protera™ Level 2 Coveralls Proximity Suit
Proximity Suit
Our Price: $3,300.00
New lightweight 6.5 oz. Khaki Protera™ Coveralls are arc rated to 8.5 cal/cm2 and meet NFPA 70E Hazard/Risk Category 2. Protera™ is inherently flame resistant so the protection won't wash or wear away and Protera™ offers better comfort and durability than Flame Resistant cotton-nylon blends. Coveralls feature a sewn-in elastic waist and a two-way covered zipper down the front for easy entry. The garment's generous pockets include two breast pockets with flaps and hidden snap closures, two large rear pockets and two front slash pockets and two front slash pockets with pass-through slashes for access to pants pockets. Made in U.S.A. in accordance with regulations laid out in NFPA 70E-2004, ASTM 1506-2002a and OSHA 29 CFR 1910.269.

Available in three sizes.

Insulated suit with aluminized ZETEX® fabric outer shell and double vapor barrier. Should be used when steam and volatile materials present an additional hazard.  Suitable for short duration in ambient temperatures up to 500° F (260° C). Includes hood, coat, pants, boots, mitts and heavy-duty storage trunk.
Shoulder Length Deluxe Proban® FR7A Liner Sperian 100% Kevlar® 14" Knit Sleeve (Single)
100% cotton shoulder-length Proban® FR7A shell will fleece inner lining, and flame-retardant for 25-50 washings, with Nomex® thread.

One size fits most.

This two-ply 100% Kevlar® ambidextrous sleeve can withstand temperatures up to 900° F (482° C) without breaking down, providing excellent flame resistance. Knit with 100% Kevlar® and reinforced with real leather, the snug fit conforms to arm for less obstruction while working. Thumb hole holds sleeve securely in place while offering increased protection in the palm area. Soft and flexible; lightweight.
Tillman™ Lightweight Flame Retardant Coveralls Tillman™ Westex® Proban® FR7A® Flame Retardant Jacket
Lightweight 9 oz. coveralls are popular for cool comfort and flame retardant properties. Proban® FR7A® 100% green cotton material protects from sudden flame exposure and light sparks. These coveralls feature snap closures, two breast pockets, two rear pockets and two inset front pockets. Proban® FR7A® is made in U.S.A.

Available in three sizes

Tillman™ Navy Blue 30" Flame-retardant Jackets are structured to self-quench when exposed to flame or thermal ignition sources and it does not shrink, melt or drip molten residues. It is constructed of Westex Proban® FR7A® 9 oz 100% cotton Whipcord flame-retardant fabric for durability and offers cool as well as comfortable usage. Offers cost effective protection from abrupt flame exposure, light molten splash and sparks. Cool, comfortable, and washable.
Available in six sizes.


Whizard® Armguard II Sleeve Wizard Yellow PVC/Nylon Flame Resistant Bib Pants
The Armguard II protects arms from lacerations and provides thermal protection. Made of high performance materials with wire, this ambidextrous sleeve provides medium-duty protection, excellent for plastic trimming, metal handling, glass manufacturing and door and window manufacturing. ANSI Level 5.

Available in two different lengths.

The nylon scrim material found in the Wizard series rainwear will amaze you with its hardy, rip-resistant qualities. Has good puncture and abrasion resistance as well. Includes double-coated PVC over nylon scrim material, with Rip-Stop fabric to provide excellent resistance to snags and tears, limited flammability (tested in accordance with ASTM D-6413 Standard), and protection against most chemicals, oils and acids. Features reinforced crotch and black plastic snaps at ankles.

Available in four sizes.

Wizard Yellow PVC/Nylon Flame Resistant Bib Pants With Fly Closure Wizard Yellow PVC/Nylon Flame Resistant Rain Jacket With Attached Hood
The nylon scrim material found in the Wizard series rainwear will amaze you with its hardy, rip-resistant qualities. Has good puncture and abrasion resistance as well. Includes double-coated PVC over nylon scrim material, with Rip-Stop fabric to provide excellent resistance to snags and tears, limited flammability (tested in accordance with ASTM D-6413 Standard), and protection against most chemicals, oils and acids. Features reinforced crotch and black plastic snaps at ankles and fly.

Available in eight sizes.

The nylon scrim material found in the Wizard series rainwear will amaze you with its hardy, rip-resistant qualities. Has good puncture and abrasion resistance as well. Includes jacket with attached hood of double-coated PVC over nylon scrim material, with Rip-Stop fabric to provide excellent resistance to snags and tears, limited flammability (tested in accordance with ASTM D-6413 Standard), and protection against most chemicals, oils and acids. Features raglan sleeves and black plastic snaps at front and wrists.

Available in five sizes.

Wizard Yellow PVC/Nylon Flame Resistant Rain Jacket With Detachable Hood Wizard Yellow PVC/Nylon Flame Resistant Rider Coat
The nylon scrim material found in the Wizard series rainwear will amaze you with its hardy, rip-resistant qualities. Has good puncture and abrasion resistance as well. Includes jacket with detachable hood of double-coated PVC over nylon scrim material, with Rip-Stop fabric to provide excellent resistance to snags and tears, limited flammability (tested in accordance with ASTM D-6413 Standard), and protection against most chemicals, oils and acids. Features raglan sleeves and black plastic snaps at front and wrists.

Available in seven sizes.

The nylon scrim material found in the Wizard series rainwear will amaze you with its hardy, rip-resistant qualities. Has good puncture and abrasion resistance as well. Includes coat and matching hood of double-coated PVC over nylon scrim material, with Rip-Stop fabric to provide excellent resistance to snags and tears, limited flammability (tested in accordance with ASTM D-6413 Standard), and protection against most chemicals, oils and acids. Features raglan sleeves, cape ventilated back, two pockets and black plastic snap closures on front and wrists.

Available in five sizes.

Wizard Yellow PVC/Nylon Flame Resistant Two-Piece Rain Suit Wizard Yellow PVC/Nylon LF Rain Coat
The nylon scrim material found in the Wizard series rainwear will amaze you with its hardy, rip-resistant qualities. Has good puncture and abrasion resistance as well. Includes jacket and matching bib pants of double-coated PVC over nylon scrim material, with Rip-Stop fabric to provide excellent resistance to snags and tears, limited flammability (tested in accordance with ASTM D-6413 Standard), and protection against most chemicals, oils and acids. Features detachable hood, raglan sleeves, reinforced crotch and black plastic snaps at front, wrists, waist, ankles and fly.

Available in ten sizes.

The nylon scrim material found in the Wizard series rainwear will amaze you with its hardy, rip-resistant qualities. Has good puncture and abrasion resistance as well. Includes coat and matching hood of double-coated PVC over nylon scrim material, with Rip-Stop fabric to provide excellent resistance to snags and tears, limited flammability (tested in accordance with ASTM D-6413 Standard), and protection against most chemicals, oils and acids. Features raglan sleeves, cape ventilated back, two pockets, underarm air vents and black plastic snap closures on front and wrists.

Available in nine sizes.

   
 
A word of CAUTION:
Do not confuse ambient, conductive and radiant heat!

The following definitions are given as a reference as well as vital assistance in selecting the proper clothing for heat protection:

Ambient Heat is the surrounding atmospheric temperature in a given situation. Examples: 65° - 70° F (18° - 21° C) in an office; 2000° F (1093° C) in a fire walk.

Conductive Heat is generated by direct contact with a hot surface. Examples: picking up a burner block at 600° F (315° C); leaning against a furnace wall at 1000° F (537° C)

Radiant Heat is generated by the sun or a source of fire, such as a fireplace or a furnace, and is absorbed by masses of materials struck by the heat's rays (this is why it's cooler in the shade on a hot day).


1x1 spacer
1x1 spacer www.thecuresafety.com
4950 Grover St
Omaha, NE 68106
(402) 553-8816
footer
1x1 spacer
 About Us
1x1 spacer
 Return Policy
1x1 spacer
 Privacy Policy
1x1 spacer
 Send Us Feedback
 
1x1 spacer
Company Info | Advertising | Product Index | Category Index | Help | Terms of Use
Copyright © 2015 www.thecuresafety.com All Rights Reserved.
Built with Volusion