|
|
|
|
|
|
|
|
|
|
Retrofit single shade auto darkening welding lenses are perfect for general-purpose stick and MIG welding applications. A dark state 10 with an incredibly clear light state of 3. Not recommended for TIG welding less than 40 amps.
|
Retrofit single shade auto darkening welding lenses are perfect for general-purpose stick and MIG welding applications. A dark state 10 with an incredibly clear light state of 3. Not recommended for TIG welding less than 40 amps.
|
|
|
|
|
|
|
|
|
|
|
|
|
Comes with shade 5.0 polycarbonate lenses that offers superior impact resistance over traditional glass plates. Features a polycarbonate safety lens to protect the wearer when the welding lens is in the raised position. Also includes CR39 cover lens to protect the filter against pitting and scratching. Comfortable elastic straps are easily adjusted. Replacement lenses are also available. Treated with our exclusive Duramass® scratch-resistant coating. Vented to decrease fogging. Viewing areas are 50mm in diameter. Meets ANSI Z87.1 safety standards.
|
Replacement Shade 4 hardened glass lenses for 50mm Welding Goggles.
|
|
|
|
|
|
|
|
|
|
|
|
|
Clear polycarbonate cover lenses for 50mm Welding Goggles, offering scratch and spatter resistance when used as an outer cover lens. Meets or exceeds ANSI Z87.1-2003 Standard for impact protection.
|
Replacement Shade 5 polycarbonate lenses for 50mm Welding Goggles. Meets or exceeds ANSI Z87.1-2003 Standard for impact protection.
|
|
|
|
|
|
|
|
|
|
|
|
|
Lightweight, hard plastic goggles come with 50mm (2'') Shade 5 polycarbonate lenses. Baffled side-shields allow maximum ventilation while preventing entry of light. Comfort is achieved with an elastic headband and nose piece. Excellent economy protection. Meets ANSI Z87+, CSA Z94.3, CE and various international standards.
|
The Astro® Over-The-Glasses model boasts a 145mm wide, single-piece, polycarbonate lens that adjusts to three positions and slips over most prescription glasses with ease. Lenses available in clear, amber and gray.
|
|
|
|
|
|
|
|
|
|
|
|
|
Not only does the Uvex Bandit look stylish, it provides superior protection with its wrap-around uni-lens design. Enjoy excellent coverage, unmatched comfort and unrivaled quality.
Lenses available in clear and espresso.
|
The Bearkat® is one of the most economical products offered in the eye protection market today. Features a lightweight frame for extended eyewear, with padded spatula temples for added comfort.
|
|
|
|
|
|
|
|
|
|
|
|
|
A lightweight frame for extended eyewear, with padded spatula temples for added comfort, and four levels of bifocal-style magnification for assembly with small parts and delicate work. The temple sleeve is made to fit with an optional breakaway cord. Universal nose bridge accommodates a variety of wearers.
|
The Bearkat™ is one of the most economical products offered in the eye protection market today. The Bearkat™ features a lightweight frame for extended eyewear, with padded spatula temples for added comfort.
Lenses available in ten styles.
|
|
|
|
|
|
|
|
|
|
|
|
|
The Checklite is a lightweight, stylish and inexpensive safety glass that your employees will want to wear all day! Lenses available in six colors.
|
Indirect venting to provide circulation at the same time as splash protection. Made with impeccably clear, anti-fog material for maximum visibility.
|
|
|
|
|
|
|
|
|
|
|
|
|
Use this 3'' x 9'' x 6'' acrylic unit with safety green flip door to hold frequently used items such as safety glasses and earplugs. Convenient size allows it to be placed anywhere for quick access.
|
Use this 3'' x 9'' x 6'' acrylic unit with safety green flip door to hold four to six pairs of glasses. The convenient size allows it to be placed anywhere for quick access.
|
|
|
|
|
|
|
|
|
|
|
|
|
This 16'' x 15 3/4'' x 4'' wall-mountable acrylic unit features two separate compartments with safety green doors designed to hold approximately 40 pairs of safety glasses.
|
This inexpensive model of clear goggles is designed for basic eye protection that easily fits over eyeglasses. Vented; not splash-resistant. Available in two sizes.
|
|
|
|
|
|
|
|
|
|
|
|
|
Ventless goggles create a seal around the face, protecting your eyes from splashes and gases. Features a 0.060 mm clear lens, Duramass® scratch-resistant coating, Duramass® AF4 anti-fog coating, and an easily adjustable latex-free rubber strap that offers each user a personal fit.
|
ForceFlex™ technology incorporates a patented, multi-injection molding of the lens with an ultra-flexible Thermo Plastic Urethane (TPU) frame. Due to this construction, it can achieve a military ballistic level impact resistance at over 1,000 feet (304 meters) per second. The TPU material allows the black frame to flex and fit individual faces from large to small. The dual material templates combine Thermo Plastic Rubber (TPR) for comfort and polycarbonate for durability. Universal nose bridge and bayonet temple design provide comfort, while the shaded lenses block 99.9% of Ultraviolet Radiation. Each pair comes with a protective microfiber cleaning bag. Available in four lens shades.
|
|
|
|
|
|
|
|
|
|
|
|
|
ForceFlex™ technology incorporates a patented, multi-injection molding of the lens with an ultra-flexible Thermo Plastic Urethane (TPU) frame. Due to this construction, it can achieve a military ballistic level impact resistance at over 1,000 feet (304 meters) per second. The TPU material allows the translucent orange frame to flex and fit individual faces from large to small. The dual material templates combine Thermo Plastic Rubber (TPR) for comfort and polycarbonate for durability. Universal nose bridge and bayonet temple design provide comfort, while the shaded lenses block 99.9% of Ultraviolet Radiation. Each pair comes with a protective microfiber cleaning bag. Available in two lens shades.
|
Uvex Genesis® glasses offer unparalleled comfort, protection and style. Built with MMT - Multi-Material Technology and a high level of adjustability, Genesis provides workers with extraordinary all-day comfort and raises compliance.
|
|
|
|
|
|
|
|
|
|
|
|
|
2'' x 4 1/2'' These glass lenses are available in different levels of magnification to increase the welder's attention to smaller details.
Available in nine magnification levels.
|
The stylish and modern design of the GX1™ provides a wide, unobstructed field of vision, making it a great option when peripheral vision is important. The Thermo-Plastic Rubber face seal is one of the softest available, making the GX1™ Goggle a very comfortable option for longer wear. Great for impact protection. Features a gray Thermo-Plastic Rubber body, indirect venting for increased airflow, an adjustable silicone strap, and a clear polycarbonate lens with a anti-scratch and anti-fog coating.
|
|
|
|
|
|
|
|
|
|
|
|
|
The stylish and modern design of the GX1™ provides a wide, unobstructed field of vision, making it a great option when peripheral vision is important. The Thermo-Plastic Rubber face seal is one of the softest available, making the GX1™ Goggle a very comfortable option for longer wear. Great for impact protection. Features a gray Thermo-Plastic Rubber body, indirect venting for increased airflow, an adjustable silicone strap, and a gray polycarbonate lens with a anti-scratch and anti-fog coating.
|
These stylish safety glasses provide both safety and the style of the Harley-Davidson© logo and motif.
|
|
|
|
|
|
|
|
|
|
|
|
|
This safety glass features a gasket-like seal surrounding 80% of the lens to simulate the feel and function of goggles. Also features an extended brow guard, non-slip co-injected soft temples, soft secure thermoplastic rubber (TPR) nose pad, rugged clear polycarbonate lenses that filter 99.9% of UV rays, and exclusive Duramass® scratch-resistant and anti-fog coatings. Meets or Exceeds ANSI Z87+
|
This safety glass features a gasket-like seal surrounding 80% of the lens to simulate the feel and function of goggles. Also features an extended brow guard, non-slip co-injected soft temples, soft secure thermoplastic rubber (TPR) nose pad, rugged gray polycarbonate lenses that filter 99.9% of UV rays, and exclusive Duramass® scratch-resistant and anti-fog coatings. Meets or Exceeds ANSI Z87+
|
|
|
|
|
|
|
|
|
|
|
|
|
This safety glass features a gasket-like seal surrounding 80% of the lens to simulate the feel and function of goggles. Also features an extended brow guard, non-slip co-injected soft temples, soft secure thermoplastic rubber (TPR) nose pad, rugged gray polycarbonate lenses that filter 99.9% of UV rays, and exclusive Duramass® scratch-resistant and anti-fog coatings. Meets or Exceeds ANSI Z87+
|
This unique goggle design features the Monogoggle XTR™ with a detachable polycarbonate shield for full face protection. Curved faceshield conforms to the shape of your face, offering better protection than standard safety glasses, all in a lightweight frame of 14.1 ounces.
|
|
|
|
|
|
|
|
|
|
|
|
|
Whether on the slopes or in the workplace, Klondike's matte black finish, 11° base curves lens, adjustable temples and propriety gel nose piece keeps you at the peak of comfort and style all day long.
Lenses available in 12 different styles.
|
4 1/2'' x 5 1/4'' cover plate made with high performance CR-39® for maximum scratch and spatter resistance when used as an outer cover lens to protect the filter lense.
|
|
|
|
|
|
|
|
|
|
|
|
|
4 1/2'' x 5 1/4'' specialty light filtration lens for all your welding and cutting needs. Special gold filters allow the welder to see his work in true, more natural colors, staying cooler than traditional glass lenses at approximately a third of the weight.
Available in five Shading values.
|
4 1/2'' x 5 1/4'' specialty light filtration lens for purposes such as welding, to be used in conjunction with compatible goggles.
Available in 10 Shading values.
|
|
|
|
|
|
|
|
|
|
|
|
|
Polycarbonate cover plate protect your welding lens against spatter, sparks and small particles. Thinner than standard cover plates, this 0.040 lens is designed to fit the contour of Radnor® 4'' x 5'' Cobra™ helmets for an optimal fit.
|
4 1/2'' x 5 1/4'' polycarbonate lens offers maximum impact strength, used as an inner lens nearest to the eyes to protect against severe impacts that could shatter or penetrate the filter lens.
|
|
|
|
|
|
|
|
|
|
|
|
|
This fashionable wrap-around polycarbonate lens design offers an excellent orbital seal and a higher level of protection from side impacts due to its greater coverage area. TPR (Thermal Plastic Rubber) temple inserts that enhance grip and comfort are included on all styles. Also features dielectric design, bayonet temples, soft secure gel nose pads, and Duramass® scratch-resistant lens coating for a longer-lasting safety glass. Meets or exceeds ANSI Z87.1 Standard for high impact, CAN/CSA Z94.3-02 Standard, and CE EN166 Standard. Safe for utility/electrical work. Lenses available in nine styles.
|
This fashionable wrap-around lens design offers an excellent orbital seal and a higher level of protection from side impacts due to its greater coverage area. The addition of open cell foam provides a greater level of comfort along with increased protection from dust, debris, and small particles by creating a tighter orbital seal. TPR (Thermal Plastic Rubber) temple inserts that enhance grip and comfort are included on all styles. The Law® 3 has a soft, secure TPR nose pad for additional comfort. Also features dielectric design, bayonet temples and Duramass® scratch-resistant lens coating. Anti-fog lenses filter 99% of UV radiation. Meets or exceeds ANSI Z87.1 Standard. Meets CAN/CSA Z94.3-02 Standard.
Lenses available in clear and gray.
|
|
|
|
|
|
|
|
|
|
|
|
|
This fashionable Over The Glass (OTG) wrap-around lens design offers excellent protection for your prescription eyewear and ANSI Z87+ high impact protection for your eyes. Features an oversized frame and lens to fit over prescription glasses, a dielectric design with no metal parts, 5 position ratchet action temple that allows lens angle adjustment, thermal plastic rubber (TPR) temple inserts that enhance grip and comfort, built in side protection that prevents particles from entering from the sides, and lens filtration of 99% of UV radiation.
Lenses available in two colors.
|
Soft contoured vinyl frame fits snug to your face and over eyeglasses. A tough 2'' x 4'' polycarbonate lens (Shade 5) is fitted to an easy-to-use lift frame for maximum on-the-job versatility. Hooded vents prevent fogging and offer good ventilation. Meets ANSI Z87+, CSA Z94.3, CE and various international standards.
|
|
|
|
|
|
|
|
|
|
|
|
|
Provides tough eye protection for the workplace. Lightweight frame with universal nose bridge. Superior side and brow protection. High impact, abrasion resistant polycarbonate lens. Lenses available in clear and gray.
|
Rigid thermoplastic frame offers superior heat and impact protection that fits easily over eye glasses. Comes with a tough, 2'' x 4'' Shade 5 polycarbonate lens. Comfort and protection together with a contoured shape that fits snug to keep out dirt and light with an adjustable elastic band to keep goggles firmly in place. Meets ANSI Z87+, CSA Z94.3, CE and various international standards.
|
|
|
|
|
|
|
|
|
|
|
|
|
2'' x 4 1/2'' These polycarbonate lenses not only offer eye protection as a sturdy inner lens for welding goggle systems, but are also available in different levels of magnification to increase the welder's attention to smaller details. Available in eight magnification levels
|
Features a closed cell foam seal to provide optimum protection from dust and debris. Treated with our exclusive Duramass® scratch-resistant coating. Lenses available in clear, gray and amber.
|
|
|
|
|
|
|
|
|
|
|
|
|
Features a closed cell foam seal to provide optimum protection from dust and debris. Treated with our exclusive Duramass® scratch-resistant coating. Lenses available in clear, gray and indoor/outdoor mirror.
|
Rigid thermoplastic frame offers superior heat and impact protection that fits easily over eye glasses. Comes with a tough, 2'' x 4'' Shade 5 polycarbonate lens. Comfort and protection together with a contoured shape that fits snug to keep out dirt and light with an adjustable elastic band to keep goggles firmly in place. Meets ANSI Z87+, CSA Z94.3, CE and various international standards.
|
|
|
|
|
|
|
|
|
|
|
|
|
A hot addition to the Deluxe Series! Rubicon features exclusive carbon cut technology with a single lens design for 180° of optically correct viewing area. Case and cord included. Meets ANSI Z87.1+ Safety Standards.
Lenses available in emerald mirror or fire mirror.
|
Help workers keep safety eyewear handy!
Available with one of three safety slogans printed on the material, which research has shown to be effective.
|
|
|
|
|
|
|
|
|
|
|
|
|
Filters out 99.9% of U.V. Radiation. Lens color available currently only available in Fire Mirror. Case and cord included.
|
2'' x 4 1/2'' cover plate made with high performance CR-39® for maximum scratch and spatter resistance when used as an outer cover lens to protect the filter lense.
|
|
|
|
|
|
|
|
|
|
|
|
|
2'' x 4 1/4'' specialty light filtration lens for all your welding and cutting needs. Special gold filters allow the welder to see his work in true, more natural colors, staying cooler than traditional glass lenses at approximately a third of the weight. Available in five Shading values.
|
2'' x 4 1/4'' specialty light filtration lens for purposes such as welding, to be used in conjunction with compatible goggles.
Available in 11 Shading values.
|
|
|
|
|
|
|
|
|
|
|
|
|
Polycarbonate cover plate protect your welding lens against spatter, sparks and small particles. Thinner than standard cover plates, this 0.040 lens is designed to fit the contour of Radnor® 2'' x 4'' Cobra™ helmets for an optimal fit.
|
2'' x 4 1/2'' polycarbonate lens offers maximum impact strength, used as an inner lens nearest to the eyes to protect against severe impacts that could shatter or penetrate the filter lens.
|
|
|
|
|
|
|
|
|
|
|
|
|
This black nylon cord allows for the connection when temple end holes are not present, with an open-ended sleeve to fit over the temple.
|
This blue nylon cord allows for the connection when temple end holes are not present, with an open-ended sleeve to fit over the temple.
|
|
|
|
|
|
|
|
|
|
|
|
|
Splash GoggleGear™ goes way beyond the standards with a combination of design and performance features not found in any other splash goggle. Available in two different sizes.
|
Comes with shade 5.0 polycarbonate lens that offers superior impact resistance over traditional glass plates. Also includes CR39 cover lense to protect the filter against pitting and scratching. Comfortable elastic straps are easily adjusted. Replacement lenses are also available. Treated with our exclusive Duramass® scratch-resistant coating. Vented to decrease fogging. Viewing area is 2'' x 4.5''. Meets ANSI Z87.1 safety standards.
|
|
|
|
|
|
|
|
|
|
|
|
|
Workers in the Storm® can expect extreme comfort with this face-flattering protective eyewear. Ratchet action temples combined with non-slip rubber head grips create a customized fit for virtually any head size.
|
Includes an anti-fog lens, indirect vents and chemical protection. Easy adjusting elastic strap design offers each user a personal fit. Lens available in two colors.
|
|
|
|
|
|
|
|
|
|
|
|
|
Universal Magnifier Lenses are designed to fit Radnor® Cobra™ and most other manufacturer's welding helmets. Get to those hard to see areas or sue for jobs requiring detailed work.
Available in five magnification levels.
|
Our popular universal flex shields fit easily over most prescription frames to turn ordinary glasses into ANSI compliant safety gear.
|
|
|
|
|
|
|
|
|
|
|
|
|
Classic flip-up style offers versatility for workers in unique environments. Black frame with flip-down green Infra-Dura® Welding Shade 3.0 filtration.
|
Our visitor specs offer nearly universal comfort and standard eye protection. The wraparound polycarbonate lenses offer maximum protection and comfort for your guests. Don't take chances - offer eye protection to every person who walks through your facility. Dielectric.
|
|
|
|
|
|
|
|
|
|
|
|
|
This 18'' x 8'' x 4'' wall-mountable acrylic dispenser features a bottom door to keep your visitor specs (up to 20 pairs) in place.
|
Our visitor specs offer nearly universal comfort and standard eye protection. The wraparound polycarbonate lenses offer maximum protection and comfort for your guests. Don't take chances - offer eye protection to every person who walks through your facility. Dielectric.
|
|
|
Anti-Fog Coating: Provides excellent fog prevention in high humidity environments where sudden shifts in temperature occur.
Gray: Four outdoor applications where light and glare can cause eye strain and fatigue. 18% VLT
Light Gray: Serves the same purpose as gray lenses, yet allows more visible light through the lens for indoor / outdoor use. Reduces glare from artificial light such as halogen and fluorescent lighting. 62% VLT
Amber: Blocks the blue portion of the visible light spectrum, creating maximum contrast enhancement, particularly in low light. 85% VLT
Orange: Excellent for indoor and low light areas as well as cloudy or hazy days. Blocks out blue and green light portion. 57% VLT
Brown and Espresso: Outdoor applications where sunlight and glare cause eye strain and fatigue. Meets color traffic signal recognition requirements. 12% VLT
Indoor/Outdoor Clear Mirror: Allows more visible light through the lens for indoor / outdoor use. Reduces glare from artificial light such as halogen and fluorescent lighting. 55% VLT
Vermillion: Enhances contrast while reducing all colors equally for optimum color recognition. Ideal for indoor inspection. 55% VLT
Light Blue: Allows more visible light through the lens for indoor / outdoor use. Reduces glare from artificial light such as halogen and fluorescent lighting.
Filter Shades: Protects against ultraviolet and infrared radiation generated when working with molten metal, and in welding, cutting, soldering and brazing.
Polarized: For use outdoors to protect from excessive glare that can cause eye strain and fatigue.
